Replicant

[    0.000000] Booting Linux on physical CPU 0xa00

[    0.000000] Linux version 5.7.0-09900-g435faf5c218a-dirty (toby@workstation) (gcc version 9.3.0 (GCC), GNU ld (GNU Binutils) 2.34) #5 SMP PREEMPT Fri Jun 5 18:36:31 EEST 2020

[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] OF: fdt: Machine model: Samsung Galaxy Note 8.0 (GT-N5110) based on Exynos4412

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] cma: Reserved 96 MiB at 0xb9c00000

[    0.000000] Samsung CPU ID: 0xe4412220

[    0.000000] Zone ranges:

[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006f7fffff]

[    0.000000]   HighMem  [mem 0x000000006f800000-0x00000000bfbfffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfbfffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfbfffff]

[    0.000000] On node 0 totalpages: 523264

[    0.000000]   Normal zone: 1520 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 194560 pages, LIFO batch:63

[    0.000000]   HighMem zone: 328704 pages, LIFO batch:63

[    0.000000] Running under secure firmware.

[    0.000000] percpu: Embedded 20 pages/cpu s51692 r8192 d22036 u81920

[    0.000000] pcpu-alloc: s51692 r8192 d22036 u81920 alloc=20*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 521744

[    0.000000] Kernel command line: console=ttySAC2,115200 loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2 consoleblank=0 lpj=3981312 vmalloc=256m oops=panic pmic_info=67 cordon=a8b8eed9d071b7f7ca5652680ce8ef33 connie=GT-N5110_OPEN_EUR_f6a16f937eff6c56da829647aa9737c4 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N5110XXSDQA2 androidboot.selinux=enforcing androidboot.warranty_bit=1 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=41031e1351de509f snd_soc_core.pmdown_time=1000

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)

[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off

[    0.000000] Memory: 1944304K/2093056K available (12288K kernel code, 909K rwdata, 4328K rodata, 1024K init, 6461K bss, 50448K reserved, 98304K cma-reserved, 1216512K highmem)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Running RCU self tests

[    0.000000] rcu: Preemptible hierarchical RCU implementation.

[    0.000000] rcu:     RCU event tracing is enabled.

[    0.000000] rcu:     RCU lockdep checking is enabled.

[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.

[    0.000000]  Trampoline variant of Tasks RCU enabled.

[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.

[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[    0.000000] L2C: platform modifies aux control register: 0x02070000 -> 0x3e470001

[    0.000000] L2C: platform provided aux values permit register corruption.

[    0.000000] L2C: DT/platform modifies aux control register: 0x02070000 -> 0x3e470001

[    0.000000] L2C-310 enabling early BRESP for Cortex-A9

[    0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9

[    0.000000] L2C-310 ID prefetch enabled, offset 8 lines

[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled

[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB

[    0.000000] L2C-310: CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001

[    0.000000] random: get_random_bytes called from start_kernel+0x380/0x520 with crng_init=0

[    0.000000] Exynos4x12 clocks: sclk_apll = 400000000, sclk_mpll = 880000000

[    0.000000]  sclk_epll = 400000000, sclk_vpll = 108000000, arm_clk = 800000000

[    0.000000] Switching to timer-based delay loop, resolution 41ns

[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns

[    0.000006] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns

[    0.000677] Console: colour dummy device 80x30

[    0.000710] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar

[    0.000721] ... MAX_LOCKDEP_SUBCLASSES:  8

[    0.000732] ... MAX_LOCK_DEPTH:          48

[    0.000742] ... MAX_LOCKDEP_KEYS:        8192

[    0.000752] ... CLASSHASH_SIZE:          4096

[    0.000762] ... MAX_LOCKDEP_ENTRIES:     32768

[    0.000772] ... MAX_LOCKDEP_CHAINS:      65536

[    0.000781] ... CHAINHASH_SIZE:          32768

[    0.000791]  memory used by lock dependency info: 4029 kB

[    0.000801]  memory used for stack traces: 2112 kB

[    0.000812]  per task-struct memory footprint: 1536 bytes

[    0.000899] Calibrating delay loop (skipped) preset value.. 796.26 BogoMIPS (lpj=3981312)

[    0.000920] pid_max: default: 32768 minimum: 301

[    0.001283] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)

[    0.001304] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)

[    0.004323] CPU: Testing write buffer coherency: ok

[    0.004420] CPU0: Spectre v2: using BPIALL workaround

[    0.005469] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00

[    0.008520] Setting up static identity map for 0x40100000 - 0x40100060

[    0.009096] rcu: Hierarchical SRCU implementation.

[    0.014183] soc soc0: Exynos: CPU[EXYNOS4412] PRO_ID[0xe4412220] REV[0x20] Detected

[    0.015699] smp: Bringing up secondary CPUs ...

[    0.018513] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01

[    0.018526] CPU1: Spectre v2: using BPIALL workaround

[    0.021966] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02

[    0.021979] CPU2: Spectre v2: using BPIALL workaround

[    0.024516] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03

[    0.024529] CPU3: Spectre v2: using BPIALL workaround

[    0.025109] smp: Brought up 1 node, 4 CPUs

[    0.025126] SMP: Total of 4 processors activated (3185.04 BogoMIPS).

[    0.025139] CPU: All CPU(s) started in SVC mode.

[    0.028155] devtmpfs: initialized

[    0.122298] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[    0.125163] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.125218] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)

[    0.129334] pinctrl core: initialized pinctrl subsystem

[    0.131560] /soc/power-domain@10023c80 has as child subdomain: /soc/power-domain@10023c20.

[    0.135363] thermal_sys: Registered thermal governor 'step_wise'

[    0.138222] NET: Registered protocol family 16

[    0.143553] DMA: preallocated 256 KiB pool for atomic coherent allocations

[    0.149575] cpuidle: using governor menu

[    0.150847] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

[    0.150886] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.196609] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 97

[    0.251271] gpio gpiochip0: (gpa0): added GPIO chardev (254:0)

[    0.251297] gpiochip_setup_dev: registered GPIOs 0 to 7 on device: gpiochip0 (gpa0)

[    0.251827] gpio gpiochip1: (gpa1): added GPIO chardev (254:1)

[    0.251845] gpiochip_setup_dev: registered GPIOs 8 to 13 on device: gpiochip1 (gpa1)

[    0.252356] gpio gpiochip2: (gpb): added GPIO chardev (254:2)

[    0.252373] gpiochip_setup_dev: registered GPIOs 14 to 21 on device: gpiochip2 (gpb)

[    0.252882] gpio gpiochip3: (gpc0): added GPIO chardev (254:3)

[    0.252900] gpiochip_setup_dev: registered GPIOs 22 to 26 on device: gpiochip3 (gpc0)

[    0.253397] gpio gpiochip4: (gpc1): added GPIO chardev (254:4)

[    0.253414] gpiochip_setup_dev: registered GPIOs 27 to 31 on device: gpiochip4 (gpc1)

[    0.253916] gpio gpiochip5: (gpd0): added GPIO chardev (254:5)

[    0.253933] gpiochip_setup_dev: registered GPIOs 32 to 35 on device: gpiochip5 (gpd0)

[    0.254419] gpio gpiochip6: (gpd1): added GPIO chardev (254:6)

[    0.254436] gpiochip_setup_dev: registered GPIOs 36 to 39 on device: gpiochip6 (gpd1)

[    0.254952] gpio gpiochip7: (gpf0): added GPIO chardev (254:7)

[    0.254969] gpiochip_setup_dev: registered GPIOs 40 to 47 on device: gpiochip7 (gpf0)

[    0.255454] gpio gpiochip8: (gpf1): added GPIO chardev (254:8)

[    0.255472] gpiochip_setup_dev: registered GPIOs 48 to 55 on device: gpiochip8 (gpf1)

[    0.255973] gpio gpiochip9: (gpf2): added GPIO chardev (254:9)

[    0.255990] gpiochip_setup_dev: registered GPIOs 56 to 63 on device: gpiochip9 (gpf2)

[    0.256476] gpio gpiochip10: (gpf3): added GPIO chardev (254:10)

[    0.256494] gpiochip_setup_dev: registered GPIOs 64 to 69 on device: gpiochip10 (gpf3)

[    0.256993] gpio gpiochip11: (gpj0): added GPIO chardev (254:11)

[    0.257011] gpiochip_setup_dev: registered GPIOs 70 to 77 on device: gpiochip11 (gpj0)

[    0.257501] gpio gpiochip12: (gpj1): added GPIO chardev (254:12)

[    0.257519] gpiochip_setup_dev: registered GPIOs 78 to 82 on device: gpiochip12 (gpj1)

[    0.269082] gpio gpiochip13: (gpk0): added GPIO chardev (254:13)

[    0.269101] gpiochip_setup_dev: registered GPIOs 83 to 89 on device: gpiochip13 (gpk0)

[    0.269626] gpio gpiochip14: (gpk1): added GPIO chardev (254:14)

[    0.269643] gpiochip_setup_dev: registered GPIOs 90 to 96 on device: gpiochip14 (gpk1)

[    0.270134] gpio gpiochip15: (gpk2): added GPIO chardev (254:15)

[    0.270152] gpiochip_setup_dev: registered GPIOs 97 to 103 on device: gpiochip15 (gpk2)

[    0.270647] gpio gpiochip16: (gpk3): added GPIO chardev (254:16)

[    0.270664] gpiochip_setup_dev: registered GPIOs 104 to 110 on device: gpiochip16 (gpk3)

[    0.271181] gpio gpiochip17: (gpl0): added GPIO chardev (254:17)

[    0.271198] gpiochip_setup_dev: registered GPIOs 111 to 117 on device: gpiochip17 (gpl0)

[    0.271687] gpio gpiochip18: (gpl1): added GPIO chardev (254:18)

[    0.271704] gpiochip_setup_dev: registered GPIOs 118 to 119 on device: gpiochip18 (gpl1)

[    0.272208] gpio gpiochip19: (gpl2): added GPIO chardev (254:19)

[    0.272226] gpiochip_setup_dev: registered GPIOs 120 to 127 on device: gpiochip19 (gpl2)

[    0.272717] gpio gpiochip20: (gpm0): added GPIO chardev (254:20)

[    0.272735] gpiochip_setup_dev: registered GPIOs 128 to 135 on device: gpiochip20 (gpm0)

[    0.273239] gpio gpiochip21: (gpm1): added GPIO chardev (254:21)

[    0.273257] gpiochip_setup_dev: registered GPIOs 136 to 142 on device: gpiochip21 (gpm1)

[    0.273795] gpio gpiochip22: (gpm2): added GPIO chardev (254:22)

[    0.273812] gpiochip_setup_dev: registered GPIOs 143 to 147 on device: gpiochip22 (gpm2)

[    0.274314] gpio gpiochip23: (gpm3): added GPIO chardev (254:23)

[    0.274332] gpiochip_setup_dev: registered GPIOs 148 to 155 on device: gpiochip23 (gpm3)

[    0.274839] gpio gpiochip24: (gpm4): added GPIO chardev (254:24)

[    0.274857] gpiochip_setup_dev: registered GPIOs 156 to 163 on device: gpiochip24 (gpm4)

[    0.275356] gpio gpiochip25: (gpy0): added GPIO chardev (254:25)

[    0.275373] gpiochip_setup_dev: registered GPIOs 164 to 169 on device: gpiochip25 (gpy0)

[    0.275884] gpio gpiochip26: (gpy1): added GPIO chardev (254:26)

[    0.275902] gpiochip_setup_dev: registered GPIOs 170 to 173 on device: gpiochip26 (gpy1)

[    0.276391] gpio gpiochip27: (gpy2): added GPIO chardev (254:27)

[    0.276408] gpiochip_setup_dev: registered GPIOs 174 to 179 on device: gpiochip27 (gpy2)

[    0.276909] gpio gpiochip28: (gpy3): added GPIO chardev (254:28)

[    0.276926] gpiochip_setup_dev: registered GPIOs 180 to 187 on device: gpiochip28 (gpy3)

[    0.277414] gpio gpiochip29: (gpy4): added GPIO chardev (254:29)

[    0.277432] gpiochip_setup_dev: registered GPIOs 188 to 195 on device: gpiochip29 (gpy4)

[    0.277919] gpio gpiochip30: (gpy5): added GPIO chardev (254:30)

[    0.277936] gpiochip_setup_dev: registered GPIOs 196 to 203 on device: gpiochip30 (gpy5)

[    0.278441] gpio gpiochip31: (gpy6): added GPIO chardev (254:31)

[    0.278458] gpiochip_setup_dev: registered GPIOs 204 to 211 on device: gpiochip31 (gpy6)

[    0.278944] gpio gpiochip32: (gpx0): added GPIO chardev (254:32)

[    0.278962] gpiochip_setup_dev: registered GPIOs 212 to 219 on device: gpiochip32 (gpx0)

[    0.279479] gpio gpiochip33: (gpx1): added GPIO chardev (254:33)

[    0.279496] gpiochip_setup_dev: registered GPIOs 220 to 227 on device: gpiochip33 (gpx1)

[    0.280043] gpio gpiochip34: (gpx2): added GPIO chardev (254:34)

[    0.280061] gpiochip_setup_dev: registered GPIOs 228 to 235 on device: gpiochip34 (gpx2)

[    0.280570] gpio gpiochip35: (gpx3): added GPIO chardev (254:35)

[    0.280587] gpiochip_setup_dev: registered GPIOs 236 to 243 on device: gpiochip35 (gpx3)

[    0.287148] gpio gpiochip36: (gpz): added GPIO chardev (254:36)

[    0.287166] gpiochip_setup_dev: registered GPIOs 244 to 250 on device: gpiochip36 (gpz)

[    0.291199] gpio gpiochip37: (gpv0): added GPIO chardev (254:37)

[    0.291217] gpiochip_setup_dev: registered GPIOs 251 to 258 on device: gpiochip37 (gpv0)

[    0.291725] gpio gpiochip38: (gpv1): added GPIO chardev (254:38)

[    0.291743] gpiochip_setup_dev: registered GPIOs 259 to 266 on device: gpiochip38 (gpv1)

[    0.292235] gpio gpiochip39: (gpv2): added GPIO chardev (254:39)

[    0.292252] gpiochip_setup_dev: registered GPIOs 267 to 274 on device: gpiochip39 (gpv2)

[    0.292752] gpio gpiochip40: (gpv3): added GPIO chardev (254:40)

[    0.292769] gpiochip_setup_dev: registered GPIOs 275 to 282 on device: gpiochip40 (gpv3)

[    0.293255] gpio gpiochip41: (gpv4): added GPIO chardev (254:41)

[    0.293272] gpiochip_setup_dev: registered GPIOs 283 to 284 on device: gpiochip41 (gpv4)

[    0.463031] cryptd: max_cpu_qlen set to 1000

[    0.472031] reg-fixed-voltage voltage-regulator-1: GPIO lookup for consumer (null)

[    0.472051] reg-fixed-voltage voltage-regulator-1: using device tree for GPIO lookup

[    0.472112] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-1[0]'

[    0.472189] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-1[0]' - status (0)

[    0.473131] reg-fixed-voltage voltage-regulator-2: GPIO lookup for consumer (null)

[    0.473149] reg-fixed-voltage voltage-regulator-2: using device tree for GPIO lookup

[    0.473195] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-2[0]'

[    0.473261] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-2[0]' - status (0)

[    0.474150] reg-fixed-voltage voltage-regulator-3: GPIO lookup for consumer (null)

[    0.474168] reg-fixed-voltage voltage-regulator-3: using device tree for GPIO lookup

[    0.474214] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-3[0]'

[    0.474280] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-3[0]' - status (0)

[    0.475190] reg-fixed-voltage voltage-regulator-4: GPIO lookup for consumer (null)

[    0.475208] reg-fixed-voltage voltage-regulator-4: using device tree for GPIO lookup

[    0.475254] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-4[0]'

[    0.475319] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-4[0]' - status (0)

[    0.475343] gpio-115 (voltage-regulator-3): gpiod_request: status -16

[    0.475360] reg-fixed-voltage voltage-regulator-4: nonexclusive access to GPIO for voltage-regulator-4

[    0.476246] reg-fixed-voltage voltage-regulator-5: GPIO lookup for consumer (null)

[    0.476263] reg-fixed-voltage voltage-regulator-5: using device tree for GPIO lookup

[    0.476308] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-5[0]'

[    0.476373] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-5[0]' - status (0)

[    0.476397] gpio-115 (voltage-regulator-3): gpiod_request: status -16

[    0.476413] reg-fixed-voltage voltage-regulator-5: nonexclusive access to GPIO for voltage-regulator-5

[    0.477318] reg-fixed-voltage voltage-regulator-6: GPIO lookup for consumer (null)

[    0.477336] reg-fixed-voltage voltage-regulator-6: using device tree for GPIO lookup

[    0.477381] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-6[0]'

[    0.477446] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-6[0]' - status (0)

[    0.478446] reg-fixed-voltage voltage-regulator-7: GPIO lookup for consumer (null)

[    0.478463] reg-fixed-voltage voltage-regulator-7: using device tree for GPIO lookup

[    0.478508] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-7[0]'

[    0.478689] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-7[0]' - status (0)

[    0.479600] reg-fixed-voltage voltage-regulator-8: GPIO lookup for consumer (null)

[    0.479618] reg-fixed-voltage voltage-regulator-8: using device tree for GPIO lookup

[    0.479679] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-8[0]'

[    0.479746] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-8[0]' - status (0)

[    0.483596] iommu: Default domain type: Translated 

[    0.485593] SCSI subsystem initialized

[    0.485810] libata version 3.00 loaded.

[    0.486616] usbcore: registered new interface driver usbfs

[    0.486851] usbcore: registered new interface driver hub

[    0.487169] usbcore: registered new device driver usb

[    0.488129] i2c-gpio i2c-gpio-1: GPIO lookup for consumer sda

[    0.488147] i2c-gpio i2c-gpio-1: using device tree for GPIO lookup

[    0.488197] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/i2c-gpio-1[0]'

[    0.488241] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/i2c-gpio-1[0]'

[    0.488265] i2c-gpio i2c-gpio-1: using lookup tables for GPIO lookup

[    0.488384] i2c-gpio i2c-gpio-1: No GPIO consumer sda found

[    0.488401] i2c-gpio i2c-gpio-1: GPIO lookup for consumer (null)

[    0.488416] i2c-gpio i2c-gpio-1: using device tree for GPIO lookup

[    0.488493] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-1[0]' - status (0)

[    0.488518] gpio-143 (i2c-gpio-1): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.488548] i2c-gpio i2c-gpio-1: GPIO lookup for consumer scl

[    0.488564] i2c-gpio i2c-gpio-1: using device tree for GPIO lookup

[    0.488609] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/i2c-gpio-1[0]'

[    0.488651] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/i2c-gpio-1[0]'

[    0.488674] i2c-gpio i2c-gpio-1: using lookup tables for GPIO lookup

[    0.488693] i2c-gpio i2c-gpio-1: No GPIO consumer scl found

[    0.488708] i2c-gpio i2c-gpio-1: GPIO lookup for consumer (null)

[    0.488722] i2c-gpio i2c-gpio-1: using device tree for GPIO lookup

[    0.488789] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-1[1]' - status (0)

[    0.488811] gpio-144 (i2c-gpio-1): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.490134] i2c-gpio i2c-gpio-1: using lines 143 (SDA) and 144 (SCL)

[    0.490363] i2c-gpio i2c-gpio-3: GPIO lookup for consumer sda

[    0.490379] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup

[    0.490425] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/i2c-gpio-3[0]'

[    0.490468] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/i2c-gpio-3[0]'

[    0.490491] i2c-gpio i2c-gpio-3: using lookup tables for GPIO lookup

[    0.490510] i2c-gpio i2c-gpio-3: No GPIO consumer sda found

[    0.490525] i2c-gpio i2c-gpio-3: GPIO lookup for consumer (null)

[    0.490540] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup

[    0.490604] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-3[0]' - status (0)

[    0.490627] gpio-53 (i2c-gpio-3): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.490655] i2c-gpio i2c-gpio-3: GPIO lookup for consumer scl

[    0.490671] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup

[    0.490714] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/i2c-gpio-3[0]'

[    0.490756] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/i2c-gpio-3[0]'

[    0.490778] i2c-gpio i2c-gpio-3: using lookup tables for GPIO lookup

[    0.490796] i2c-gpio i2c-gpio-3: No GPIO consumer scl found

[    0.490811] i2c-gpio i2c-gpio-3: GPIO lookup for consumer (null)

[    0.490825] i2c-gpio i2c-gpio-3: using device tree for GPIO lookup

[    0.490889] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-3[1]' - status (0)

[    0.490911] gpio-52 (i2c-gpio-3): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.491725] i2c-gpio i2c-gpio-3: using lines 53 (SDA) and 52 (SCL)

[    0.491940] i2c-gpio i2c-gpio-4: GPIO lookup for consumer sda

[    0.491956] i2c-gpio i2c-gpio-4: using device tree for GPIO lookup

[    0.492094] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-4[0]' - status (0)

[    0.492129] i2c-gpio i2c-gpio-4: GPIO lookup for consumer scl

[    0.492144] i2c-gpio i2c-gpio-4: using device tree for GPIO lookup

[    0.492207] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-4[0]' - status (0)

[    0.493017] i2c-gpio i2c-gpio-4: using lines 113 (SDA) and 112 (SCL)

[    0.493486] i2c-gpio i2c-mhl: GPIO lookup for consumer sda

[    0.493502] i2c-gpio i2c-mhl: using device tree for GPIO lookup

[    0.493549] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/i2c-mhl[0]'

[    0.493593] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/i2c-mhl[0]'

[    0.493615] i2c-gpio i2c-mhl: using lookup tables for GPIO lookup

[    0.493634] i2c-gpio i2c-mhl: No GPIO consumer sda found

[    0.493649] i2c-gpio i2c-mhl: GPIO lookup for consumer (null)

[    0.493663] i2c-gpio i2c-mhl: using device tree for GPIO lookup

[    0.493745] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-mhl[0]' - status (0)

[    0.493768] gpio-44 (i2c-mhl): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.493806] i2c-gpio i2c-mhl: GPIO lookup for consumer scl

[    0.493822] i2c-gpio i2c-mhl: using device tree for GPIO lookup

[    0.493866] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/i2c-mhl[0]'

[    0.493908] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/i2c-mhl[0]'

[    0.493931] i2c-gpio i2c-mhl: using lookup tables for GPIO lookup

[    0.493949] i2c-gpio i2c-mhl: No GPIO consumer scl found

[    0.493964] i2c-gpio i2c-mhl: GPIO lookup for consumer (null)

[    0.493978] i2c-gpio i2c-mhl: using device tree for GPIO lookup

[    0.494042] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-mhl[1]' - status (0)

[    0.494064] gpio-46 (i2c-mhl): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.494885] i2c-gpio i2c-mhl: using lines 44 (SDA) and 46 (SCL)

[    0.495134] i2c-gpio i2c-gpio-0: GPIO lookup for consumer sda

[    0.495151] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup

[    0.495197] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/i2c-gpio-0[0]'

[    0.495241] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/i2c-gpio-0[0]'

[    0.495264] i2c-gpio i2c-gpio-0: using lookup tables for GPIO lookup

[    0.495283] i2c-gpio i2c-gpio-0: No GPIO consumer sda found

[    0.495298] i2c-gpio i2c-gpio-0: GPIO lookup for consumer (null)

[    0.495312] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup

[    0.495424] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-0[0]' - status (0)

[    0.495447] gpio-178 (i2c-gpio-0): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.495476] i2c-gpio i2c-gpio-0: GPIO lookup for consumer scl

[    0.495491] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup

[    0.495535] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/i2c-gpio-0[0]'

[    0.495577] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/i2c-gpio-0[0]'

[    0.495600] i2c-gpio i2c-gpio-0: using lookup tables for GPIO lookup

[    0.495618] i2c-gpio i2c-gpio-0: No GPIO consumer scl found

[    0.495633] i2c-gpio i2c-gpio-0: GPIO lookup for consumer (null)

[    0.495647] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup

[    0.495713] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-0[1]' - status (0)

[    0.495735] gpio-179 (i2c-gpio-0): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.496563] i2c-gpio i2c-gpio-0: using lines 178 (SDA) and 179 (SCL)

[    0.496780] i2c-gpio i2c-gpio-2: GPIO lookup for consumer sda

[    0.496796] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup

[    0.496841] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/i2c-gpio-2[0]'

[    0.496885] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/i2c-gpio-2[0]'

[    0.496908] i2c-gpio i2c-gpio-2: using lookup tables for GPIO lookup

[    0.496926] i2c-gpio i2c-gpio-2: No GPIO consumer sda found

[    0.496942] i2c-gpio i2c-gpio-2: GPIO lookup for consumer (null)

[    0.496956] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup

[    0.497018] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-2[0]' - status (0)

[    0.497040] gpio-40 (i2c-gpio-2): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.497070] i2c-gpio i2c-gpio-2: GPIO lookup for consumer scl

[    0.497085] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup

[    0.497128] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/i2c-gpio-2[0]'

[    0.497170] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/i2c-gpio-2[0]'

[    0.497192] i2c-gpio i2c-gpio-2: using lookup tables for GPIO lookup

[    0.497210] i2c-gpio i2c-gpio-2: No GPIO consumer scl found

[    0.497224] i2c-gpio i2c-gpio-2: GPIO lookup for consumer (null)

[    0.497239] i2c-gpio i2c-gpio-2: using device tree for GPIO lookup

[    0.497302] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-2[1]' - status (0)

[    0.497324] gpio-41 (i2c-gpio-2): enforced open drain please flag it properly in DT/ACPI DSDT/board file

[    0.498132] i2c-gpio i2c-gpio-2: using lines 40 (SDA) and 41 (SCL)

[    0.498991] s3c-i2c 13860000.i2c: slave address 0x10

[    0.499013] s3c-i2c 13860000.i2c: bus frequency set to 214 KHz

[    0.500509] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter

[    0.500993] s3c-i2c 13890000.i2c: slave address 0x10

[    0.501015] s3c-i2c 13890000.i2c: bus frequency set to 214 KHz

[    0.502137] s3c-i2c 13890000.i2c: i2c-3: S3C I2C adapter

[    0.502614] s3c-i2c 138a0000.i2c: slave address 0x10

[    0.502635] s3c-i2c 138a0000.i2c: bus frequency set to 71 KHz

[    0.503654] s3c-i2c 138a0000.i2c: i2c-4: S3C I2C adapter

[    0.504110] s3c-i2c 138b0000.i2c: slave address 0x00

[    0.504131] s3c-i2c 138b0000.i2c: bus frequency set to 71 KHz

[    0.504775] s3c-i2c 138b0000.i2c: i2c-5: S3C I2C adapter

[    0.505265] s3c-i2c 138d0000.i2c: slave address 0x10

[    0.505287] s3c-i2c 138d0000.i2c: bus frequency set to 71 KHz

[    0.506332] s3c-i2c 138d0000.i2c: i2c-7: S3C I2C adapter

[    0.506661] s3c-i2c 138e0000.i2c: slave address 0x00

[    0.506682] s3c-i2c 138e0000.i2c: bus frequency set to 71 KHz

[    0.507699] s3c-i2c 138e0000.i2c: i2c-8: S3C I2C adapter

[    0.508296] mc: Linux media interface: v0.10

[    0.508417] videodev: Linux video capture interface: v2.00

[    0.510407] Advanced Linux Sound Architecture Driver Initialized.

[    0.513242] Bluetooth: Core ver 2.22

[    0.513489] NET: Registered protocol family 31

[    0.513504] Bluetooth: HCI device and connection manager initialized

[    0.513592] Bluetooth: HCI socket layer initialized

[    0.513620] Bluetooth: L2CAP socket layer initialized

[    0.513749] Bluetooth: SCO socket layer initialized

[    0.513960] nfc: nfc_init: NFC Core ver 0.1

[    0.514215] NET: Registered protocol family 39

[    0.515928] clocksource: Switched to clocksource mct-frc

[    0.813963] NET: Registered protocol family 2

[    0.816446] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear)

[    0.816552] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)

[    0.816698] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)

[    0.817739] TCP: Hash tables configured (established 8192 bind 8192)

[    0.818184] UDP hash table entries: 512 (order: 3, 49152 bytes, linear)

[    0.818368] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear)

[    0.818950] NET: Registered protocol family 1

[    0.821372] Trying to unpack rootfs image as initramfs...

[    1.464769] Freeing initrd memory: 6788K

[    1.467713] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

[    1.478832] Initialise system trusted keyrings

[    1.479489] workingset: timestamp_bits=30 max_order=19 bucket_order=0

[    1.610964] NET: Registered protocol family 38

[    1.611182] Key type asymmetric registered

[    1.611293] Asymmetric key parser 'x509' registered

[    1.611555] bounce: pool size: 64 pages

[    1.611661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)

[    1.611744] io scheduler mq-deadline registered

[    1.611760] io scheduler kyber registered

[    1.637416] dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-141330

[    1.637438] dma-pl330 12680000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[    1.647393] dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-141330

[    1.647414] dma-pl330 12690000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[    1.650445] dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-141330

[    1.650466] dma-pl330 12850000.mdma:         DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32

[    1.856721] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[    1.863009] samsung-uart 13800000.serial: IRQ index 1 not found

[    1.863308] 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 70, base_baud = 0) is a S3C6400/10

[    1.864791] samsung-uart 13810000.serial: IRQ index 1 not found

[    1.864914] 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 71, base_baud = 0) is a S3C6400/10

[    1.866158] samsung-uart 13820000.serial: IRQ index 1 not found

[    1.866278] 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 72, base_baud = 0) is a S3C6400/10

[    1.897161] printk: console [ttySAC2] enabled

[    1.898302] samsung-uart 13830000.serial: IRQ index 1 not found

[    1.902853] 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 73, base_baud = 0) is a S3C6400/10

[    1.907269] exynos4-fb 11c00000.fimd: Adding to iommu group 0

[    1.908750] OF: graph: no port node found in /soc/fimd@11c00000

[    1.915035] exynos-mixer 12c10000.mixer: Adding to iommu group 1

[    1.921584] exynos-hdmi 12d00000.hdmi: GPIO lookup for consumer hpd

[    1.921603] exynos-hdmi 12d00000.hdmi: using device tree for GPIO lookup

[    1.921696] of_get_named_gpiod_flags: parsed 'hpd-gpios' property of node '/soc/hdmi@12d00000[0]' - status (0)

[    1.934602] sii9234 14-0039: GPIO lookup for consumer reset

[    1.934621] sii9234 14-0039: using device tree for GPIO lookup

[    1.934702] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c-mhl/hdmi-bridge@39[0]' - status (0)

[    1.970437] brd: module loaded

[    2.009159] loop: module loaded

[    2.010690] wm8994 4-001a: GPIO lookup for consumer wlf,ldo1ena

[    2.010716] wm8994 4-001a: using device tree for GPIO lookup

[    2.010806] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[    2.010864] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[    2.010957] of_get_named_gpiod_flags: parsed 'wlf,ldo1ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' - status (0)

[    2.013555] wm8994 4-001a: GPIO lookup for consumer wlf,ldo2ena

[    2.013573] wm8994 4-001a: using device tree for GPIO lookup

[    2.013636] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[    2.013692] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[    2.013755] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[    2.013772] wm8994 4-001a: using lookup tables for GPIO lookup

[    2.013795] wm8994 4-001a: No GPIO consumer wlf,ldo2ena found

[    2.041931] VMPLL_1.0V_AP: Bringing 1100000uV into 1000000-1000000uV

[    2.048804] VPLL_1.0V_AP: Bringing 1100000uV into 1000000-1000000uV

[    2.058453] CAM_ISP_MIPI_1.2V: Bringing 1800000uV into 1200000-1200000uV

[    2.066604] VABB1_1.95V: Bringing 1800000uV into 1950000-1950000uV

[    2.074577] random: fast init done

[    2.079882] VABB2_1.95V: Bringing 1800000uV into 1950000-1950000uV

[    2.098204] of_get_named_gpiod_flags: can't parse 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO20[0]'

[    2.098279] of_get_named_gpiod_flags: can't parse 'maxim,ena-gpio' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO20[0]'

[    2.100686] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO21[0]' - status (0)

[    2.103763] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/LDO22[0]' - status (0)

[    2.109623] TSP_VDD_1.8V: Bringing 2200000uV into 1800000-1800000uV

[    2.114956] LCD_VCC_3.3V: Bringing 3300000uV into 2800000-2800000uV

[    2.151278] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/BUCK8[0]' - status (0)

[    2.151300] gpio-85 (max77686-regulator): gpiod_request: status -16

[    2.152620] VMEM_VDDF_3.0V: Bringing 3000000uV into 2850000-2850000uV

[    2.156828] of_get_named_gpiod_flags: parsed 'maxim,ena-gpios' property of node '/soc/i2c@138d0000/max77686_pmic@9/voltage-regulators/BUCK9[0]' - status (0)

[    2.163517] max77693 11-0066: device ID: 0x21

[    2.176810] VSIL_1.2V: supplied by VCC_SUB_2.0V

[    2.187784] s3c64xx-spi 13930000.spi: spi bus clock parent not specified, using clock at index 0 as parent

[    2.187805] s3c64xx-spi 13930000.spi: number of chip select lines not specified, assuming 1 chip select line

[    2.188675] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/spi@13930000[0]' - status (0)

[    2.194177] mdio_bus fixed-0: GPIO lookup for consumer reset

[    2.194195] mdio_bus fixed-0: using lookup tables for GPIO lookup

[    2.194216] mdio_bus fixed-0: No GPIO consumer reset found

[    2.194673] libphy: Fixed MDIO Bus: probed

[    2.196580] usbcore: registered new interface driver rtl8150

[    2.196740] usbcore: registered new interface driver r8152

[    2.196853] usbcore: registered new interface driver lan78xx

[    2.197022] usbcore: registered new interface driver asix

[    2.197133] usbcore: registered new interface driver ax88179_178a

[    2.197243] usbcore: registered new interface driver cdc_ether

[    2.197404] usbcore: registered new interface driver smsc75xx

[    2.197563] usbcore: registered new interface driver smsc95xx

[    2.197686] usbcore: registered new interface driver net1080

[    2.197798] usbcore: registered new interface driver cdc_subset

[    2.197907] usbcore: registered new interface driver zaurus

[    2.198088] usbcore: registered new interface driver cdc_ncm

[    2.201865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.201924] ehci-exynos: EHCI Exynos driver

[    2.202546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    2.202636] ohci-exynos: OHCI Exynos driver

[    2.204409] usbcore: registered new interface driver cdc_acm

[    2.204423] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    2.204586] usbcore: registered new interface driver usblp

[    2.204699] usbcore: registered new interface driver cdc_wdm

[    2.204822] usbcore: registered new interface driver usbtmc

[    2.205392] usbcore: registered new interface driver uas

[    2.205560] usbcore: registered new interface driver usb-storage

[    2.205653] usbcore: registered new interface driver ums-alauda

[    2.205744] usbcore: registered new interface driver ums-cypress

[    2.205928] usbcore: registered new interface driver ums-datafab

[    2.206024] usbcore: registered new interface driver ums_eneub6250

[    2.206115] usbcore: registered new interface driver ums-freecom

[    2.206219] usbcore: registered new interface driver ums-isd200

[    2.206312] usbcore: registered new interface driver ums-jumpshot

[    2.206404] usbcore: registered new interface driver ums-karma

[    2.206494] usbcore: registered new interface driver ums-onetouch

[    2.206643] usbcore: registered new interface driver ums-realtek

[    2.206735] usbcore: registered new interface driver ums-sddr09

[    2.206827] usbcore: registered new interface driver ums-sddr55

[    2.206919] usbcore: registered new interface driver ums-usbat

[    2.208930] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers

[    2.376679] input: tm2-touchkey as /devices/platform/i2c-gpio-4/i2c-13/13-0020/input/input0

[    2.379445] tm2-touchkey 13-0020: failed to read i2c data: -6

[    2.382504] input: MELFAS MMS114 Touchscreen as /devices/platform/soc/13890000.i2c/i2c-3/3-0048/input/input1

[    2.384962] max77693-haptic max77693-haptic: DMA mask not set

[    2.386068] input: max77693-haptic as /devices/platform/i2c-gpio-1/i2c-11/11-0066/max77693-haptic/input/input2

[    2.531479] max77686-rtc max77686-rtc: registered as rtc0

[    2.566266] max77686-rtc max77686-rtc: setting system clock to 2000-01-01T01:01:44 UTC (946688504)

[    2.570066] s3c-rtc 10070000.rtc: rtc disabled, re-enabling

[    2.571042] s3c-rtc 10070000.rtc: registered as rtc1

[    2.572525] i2c /dev entries driver

[    2.581927] usbcore: registered new interface driver uvcvideo

[    2.581941] USB Video Class driver (1.1.1)

[    2.581954] gspca_main: v2.14.0 registered

[    8.736896] max77693-charger max77693-charger: DMA mask not set

[    9.626083] power_supply max170xx_battery: driver failed to report `present' property: -6

[   34.305486] s3c2410-wdt 10060000.watchdog: watchdog inactive, reset disabled, irq disabled

[   34.307209] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com

[   34.307638] Bluetooth: HCI UART driver ver 2.3

[   34.307655] Bluetooth: HCI UART protocol H4 registered

[   34.307668] Bluetooth: HCI UART protocol BCSP registered

[   34.307681] Bluetooth: HCI UART protocol ATH3K registered

[   34.308056] Bluetooth: HCI UART protocol Intel registered

[   34.308070] Bluetooth: HCI UART protocol AG6XX registered

[   34.308245] usbcore: registered new interface driver bcm203x

[   34.308408] usbcore: registered new interface driver bpa10x

[   34.308579] usbcore: registered new interface driver bfusb

[   34.308739] usbcore: registered new interface driver btusb

[   34.308971] usbcore: registered new interface driver ath3k

[   34.335622] pwrseq_simple sdhci3-pwrseq: GPIO lookup for consumer reset

[   34.335634] pwrseq_simple sdhci3-pwrseq: using device tree for GPIO lookup

[   34.335682] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdhci3-pwrseq[0]' - status (0)

[   34.335709] pwrseq_simple sdhci3-pwrseq: GPIO array info: chip=gpj0, size=1, get_mask=1, set_mask=1, invert_mask=1

[   34.336463] sdhci: Secure Digital Host Controller Interface driver

[   34.336471] sdhci: Copyright(c) Pierre Ossman

[   34.337212] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/sdhci@12530000[0]' - status (0)

[   34.337288] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (50000000 Hz)

[   34.337351] s3c-sdhci 12530000.sdhci: GPIO lookup for consumer cd

[   34.337361] s3c-sdhci 12530000.sdhci: using device tree for GPIO lookup

[   34.337405] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/sdhci@12530000[0]' - status (0)

[   34.337426] s3c-sdhci 12530000.sdhci: Got CD GPIO

[   34.337437] s3c-sdhci 12530000.sdhci: GPIO lookup for consumer wp

[   34.337446] s3c-sdhci 12530000.sdhci: using device tree for GPIO lookup

[   34.337473] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/sdhci@12530000[0]'

[   34.337501] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/sdhci@12530000[0]'

[   34.337514] s3c-sdhci 12530000.sdhci: using lookup tables for GPIO lookup

[   34.337527] s3c-sdhci 12530000.sdhci: No GPIO consumer wp found

[   34.368909] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA

[   34.370181] s3c-sdhci 12540000.sdhci: clock source 2: mmc_busclk.2 (44000000 Hz)

[   34.370306] s3c-sdhci 12540000.sdhci: GPIO lookup for consumer wp

[   34.370327] s3c-sdhci 12540000.sdhci: using device tree for GPIO lookup

[   34.370398] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/sdhci@12540000[0]'

[   34.370463] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/sdhci@12540000[0]'

[   34.370496] s3c-sdhci 12540000.sdhci: using lookup tables for GPIO lookup

[   34.370522] s3c-sdhci 12540000.sdhci: No GPIO consumer wp found

[   34.370636] s3c-sdhci 12540000.sdhci: allocated mmc-pwrseq

[   34.401199] mmc1: SDHCI controller on samsung-hsmmc [12540000.sdhci] using ADMA

[   34.405662] Synopsys Designware Multimedia Card Interface Driver

[   34.415112] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode.

[   34.415443] dwmmc_exynos 12550000.mmc: Using internal DMA controller.

[   34.415501] dwmmc_exynos 12550000.mmc: Version ID is 240a

[   34.416402] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 135,32 bit host data width,128 deep fifo

[   34.419910] dwmmc_exynos 12550000.mmc: GPIO lookup for consumer wp

[   34.419957] dwmmc_exynos 12550000.mmc: using device tree for GPIO lookup

[   34.420103] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12550000[0]'

[   34.420235] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12550000[0]'

[   34.420301] dwmmc_exynos 12550000.mmc: using lookup tables for GPIO lookup

[   34.420353] dwmmc_exynos 12550000.mmc: No GPIO consumer wp found

[   34.420604] mmc_host mmc2: card is non-removable.

[   34.436050] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)

[   34.456721] aat1290 aat1290: GPIO lookup for consumer flen

[   34.456758] aat1290 aat1290: using device tree for GPIO lookup

[   34.456976] of_get_named_gpiod_flags: parsed 'flen-gpios' property of node '/aat1290[0]' - status (0)

[   34.457019] no flags found for flen

[   34.457090] aat1290 aat1290: GPIO lookup for consumer enset

[   34.457121] aat1290 aat1290: using device tree for GPIO lookup

[   34.457537] of_get_named_gpiod_flags: parsed 'enset-gpios' property of node '/aat1290[0]' - status (0)

[   34.457577] no flags found for enset

[   34.462846] max77693-led max77693-led: No DT child node found for connected LED(s).

[   34.470005] max77693-led: probe of max77693-led failed with error -22

[   34.477294] s5p-secss 10830000.sss: s5p-sss driver registered

[   34.478948] usbcore: registered new interface driver usbhid

[   34.478957] usbhid: USB HID core driver

[   34.509292] exynos-ppmu: new PPMU device registered 106a0000.ppmu_dmc0 (ppmu-event3-dmc0)

[   34.509960] exynos-ppmu: new PPMU device registered 106b0000.ppmu_dmc1 (ppmu-event3-dmc1)

[   34.510550] exynos-ppmu: new PPMU device registered 112a0000.ppmu_rightbus (ppmu-event3-rightbus)

[   34.511149] exynos-ppmu: new PPMU device registered 116a0000.ppmu_leftbus0 (ppmu-event3-leftbus)

[   34.512495] input: max77693-muic/dock as /devices/platform/i2c-gpio-1/i2c-11/11-0066/max77693-muic/input/input3

[   34.528467] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)

[   34.528860] mmc2: new DDR MMC card at address 0001

[   34.531145] mmcblk2: mmc2:0001 MAG2GA 14.7 GiB 

[   34.531740] mmcblk2boot0: mmc2:0001 MAG2GA partition 1 4.00 MiB

[   34.532277] mmcblk2boot1: mmc2:0001 MAG2GA partition 2 4.00 MiB

[   34.532974] mmcblk2rpmb: mmc2:0001 MAG2GA partition 3 128 KiB, chardev (247:0)

[   34.542565]  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12

[   34.552400] max77693-muic max77693-muic: CONTROL1 : 0x1b, CONTROL2 : 0x04, state : attached

[   34.552877] max77693-muic max77693-muic: device ID : 0x8d

[   34.555537] exynos-adc 126c0000.adc: IRQ index 1 not found

[   34.564123] cm36651 10-0018: cm36651_probe: register setup failed

[   34.569965] ak8975 9-000c: GPIO lookup for consumer (null)

[   34.569976] ak8975 9-000c: using device tree for GPIO lookup

[   34.570026] of_get_named_gpiod_flags: parsed 'gpios' property of node '/i2c-gpio-0/ak8975@c[0]' - status (0)

[   34.570069] ak8975 9-000c: mounting matrix not found: using identity...

[   34.570166] ak8975 9-000c: supply vdd not found, using dummy regulator

[   34.570381] ak8975 9-000c: supply vid not found, using dummy regulator

[   34.572171] ak8975 9-000c: Error reading WIA

[   34.574968] ak8975 9-000c: Unexpected device

[   34.584911] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s

[   34.589822] NET: Registered protocol family 10

[   34.592150] Segment Routing with IPv6

[   34.592230] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

[   34.593664] NET: Registered protocol family 17

[   34.593712] NET: Registered protocol family 15

[   34.593952] Bluetooth: RFCOMM TTY layer initialized

[   34.593974] Bluetooth: RFCOMM socket layer initialized

[   34.594022] Bluetooth: RFCOMM ver 1.11

[   34.594055] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   34.594064] Bluetooth: BNEP filters: protocol multicast

[   34.594147] Bluetooth: BNEP socket layer initialized

[   34.594156] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[   34.594173] Bluetooth: HIDP socket layer initialized

[   34.594206] Key type dns_resolver registered

[   34.595086] Registering SWP/SWPB emulation handler

[   34.597549] Loading compiled-in X.509 certificates

[   34.702977] OF: graph: no port node found in /soc/dsi@11c80000

[   34.708481] exynos-hdmi 12d00000.hdmi: GPIO lookup for consumer hpd

[   34.708493] exynos-hdmi 12d00000.hdmi: using device tree for GPIO lookup

[   34.708580] of_get_named_gpiod_flags: parsed 'hpd-gpios' property of node '/soc/hdmi@12d00000[0]' - status (0)

[   34.713253] sii9234 14-0039: GPIO lookup for consumer reset

[   34.713265] sii9234 14-0039: using device tree for GPIO lookup

[   34.713318] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c-mhl/hdmi-bridge@39[0]' - status (0)

[   35.636251] sii9234 14-0039: writeb:  TPI[0x3d] <- 0x3f

[   35.640334] sii9234 14-0039: sii9234_goto_d3 failed

[   35.655952] lima 13000000.gpu: gp - mali400 version major 1 minor 1

[   35.656082] lima 13000000.gpu: pp0 - mali400 version major 1 minor 1

[   35.656208] lima 13000000.gpu: pp1 - mali400 version major 1 minor 1

[   35.656345] lima 13000000.gpu: pp2 - mali400 version major 1 minor 1

[   35.656471] lima 13000000.gpu: pp3 - mali400 version major 1 minor 1

[   35.656568] lima 13000000.gpu: l2 cache 128K, 4-way, 64byte cache line, 64bit external bus

[   35.657624] lima 13000000.gpu: bus rate = 24000000

[   35.657637] lima 13000000.gpu: mod rate = 55000000

[   35.657995] debugfs: Directory '13000000.gpu-mali' with parent 'vdd_g3d' already present!

[   35.669047] [drm] Initialized lima 1.1.0 20191231 for 13000000.gpu on minor 0

[   35.669853] wm8994 4-001a: GPIO lookup for consumer wlf,ldo1ena

[   35.669874] wm8994 4-001a: using device tree for GPIO lookup

[   35.669932] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[   35.669968] of_get_named_gpiod_flags: can't parse 'wlf,ldo1ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[   35.670032] of_get_named_gpiod_flags: parsed 'wlf,ldo1ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]' - status (0)

[   35.671724] wm8994 4-001a: GPIO lookup for consumer wlf,ldo2ena

[   35.671735] wm8994 4-001a: using device tree for GPIO lookup

[   35.671777] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpios' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[   35.671811] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena-gpio' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[   35.671850] of_get_named_gpiod_flags: can't parse 'wlf,ldo2ena' property of node '/soc/i2c@138a0000/wm1811@1a[0]'

[   35.671861] wm8994 4-001a: using lookup tables for GPIO lookup

[   35.671901] wm8994 4-001a: No GPIO consumer wlf,ldo2ena found

[   35.673691] wm8994 4-001a: supply DBVDD2 not found, using dummy regulator

[   35.673940] wm8994 4-001a: supply DBVDD3 not found, using dummy regulator

[   35.675603] wm8994 4-001a: supply AVDD2 not found, using dummy regulator

[   35.676046] wm8994 4-001a: supply CPVDD not found, using dummy regulator

[   35.676337] wm8994 4-001a: supply SPKVDD1 not found, using dummy regulator

[   35.676692] wm8994 4-001a: supply SPKVDD2 not found, using dummy regulator

[   35.680779] wm8994 4-001a: Failed to read ID register

[   35.693267] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1

[   35.693282] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024

[   35.693395] dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM

[   35.694779] using random self ethernet address

[   35.694819] using random host ethernet address

[   35.696686] usb0: HOST MAC 2a:27:c2:da:ea:80

[   35.697245] usb0: MAC 56:8f:b4:b9:af:76

[   35.697288] using random self ethernet address

[   35.697302] using random host ethernet address

[   35.698812] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008

[   35.698825] g_ether gadget: g_ether ready

[   35.699226] dwc2 12480000.hsotg: bound driver g_ether

[   35.705917] ntc-thermistor thermistor-ap: Thermistor type: ncp15wb473 successfully probed.

[   35.706910] ntc-thermistor thermistor-battery: Thermistor type: ncp15wb473 successfully probed.

[   35.711266] exynos-bus: new bus device registered: soc:bus_dmc (100000 KHz ~ 400000 KHz)

[   35.713432] exynos-bus: new bus device registered: soc:bus_acp (100000 KHz ~ 267000 KHz)

[   35.714623] exynos-bus: new bus device registered: soc:bus_c2c (100000 KHz ~ 400000 KHz)

[   35.718894] exynos-bus: new bus device registered: soc:bus_leftbus (100000 KHz ~ 200000 KHz)

[   35.720075] exynos-bus: new bus device registered: soc:bus_rightbus (100000 KHz ~ 200000 KHz)

[   35.721383] exynos-bus: new bus device registered: soc:bus_display (160000 KHz ~ 200000 KHz)

[   35.722699] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 134000 KHz)

[   35.723991] exynos-bus: new bus device registered: soc:bus_peri ( 50000 KHz ~ 100000 KHz)

[   35.724909] exynos-bus: new bus device registered: soc:bus_mfc (100000 KHz ~ 200000 KHz)

[   35.726794] exynos-hdmi 12d00000.hdmi: GPIO lookup for consumer hpd

[   35.726807] exynos-hdmi 12d00000.hdmi: using device tree for GPIO lookup

[   35.726875] of_get_named_gpiod_flags: parsed 'hpd-gpios' property of node '/soc/hdmi@12d00000[0]' - status (0)

[   35.734843] [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations

[   35.735053] exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)

[   35.735604] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)

[   35.739473] panel-samsung-nt71391 11c80000.dsi.0: GPIO lookup for consumer reset

[   35.739498] panel-samsung-nt71391 11c80000.dsi.0: using device tree for GPIO lookup

[   35.739653] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/dsi@11c80000/panel@0[0]' - status (0)

[   35.740910] exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)

[   35.740994] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)

[   35.741019] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[   35.766133] exynos-bus soc:bus_dmc: dev_pm_opp_set_rate: failed to find current OPP for freq 440000000 (-34)

[   35.775968] exynos-bus soc:bus_leftbus: dev_pm_opp_set_rate: failed to find current OPP for freq 220000000 (-34)

[   35.786586] exynos-bus soc:bus_fsys: dev_pm_opp_set_rate: failed to find current OPP for freq 146666667 (-34)

[   35.786804] exynos-bus soc:bus_peri: dev_pm_opp_set_rate: failed to find current OPP for freq 110000000 (-34)

[   36.153156] Console: switching to colour frame buffer device 100x80

[   36.246226] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device

[   36.257685] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1

[   36.261504] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-down[0]' - status (0)

[   36.261803] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-up[0]' - status (0)

[   36.262055] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-power[0]' - status (0)

[   36.262277] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/key-ok[0]' - status (0)

[   36.262826] input: gpio-keys as /devices/platform/gpio-keys/input/input4

[   36.266066] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[   36.271120] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[   36.273525] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

[   36.273721] cfg80211: failed to load regulatory.db

[   36.322811] ALSA device list:

[   36.323397]   No soundcards found.

[   36.333268] Freeing unused kernel memory: 1024K

[   36.367873] Run /init as init process

[   36.367929]   with arguments:

[   36.367965]     /init

[   36.367996]   with environment:

[   36.368027]     HOME=/

[   36.368057]     TERM=linux

[   36.368089]     sec_log=0x200000@0x46000000

[   36.368118]     sec_tima_log=0x200000@0x46202000

[   36.368149]     sec_avc_log=0x40000@0x46404000

[   36.368178]     lcdtype=2

[   36.368207]     pmic_info=67

[   36.368237]     cordon=a8b8eed9d071b7f7ca5652680ce8ef33

[   36.368267]     connie=GT-N5110_OPEN_EUR_f6a16f937eff6c56da829647aa9737c4

[   54.881953] max77693-muic max77693-muic: external connector is attached (adc:0x04, prev_adc:0x4)

[   54.883797] max77693-muic max77693-muic: external connector is attached(chg_type:0x3, prev_chg_type:0x3)

[   66.397510] CAM_SENSOR_A: disabling

[   66.397719] CAM_AF: disabling

[   66.397863] LED_A_3.0V: disabling

[   66.402219] VHSIC_1.8V: disabling

[   66.423503] ESAFEOUT2: disabling

[   66.427125] CHARGER: disabling