All presentations are available at the Presentations page, alongside with slide-decks and videos (if available).
| Person | Hardware | Comments | Usage |
|---|---|---|---|
| GNUtoo | Galaxy SIII (I9300) with the stock bootloader | Please don't reflash the bootloader or unusual partitions (EFS, etc) | Can run Replicant 6.0 => Can be lent or used for demos |
| Galaxy SIII (I9300) with the stock (signed) OS | Please don't reflash the bootloader or unusual partitions (EFS, etc) | Will be used for demos at the stand: We will monitor what is transmited on the network | |
| Galaxy SIII (I9300) with u-boot | Please don't reflash the modem partitions (EFS, MODEM) | Can run Replicant 9 and GNU/Linux | |
| Other Replicant 6.0 compatible phones: Galaxy SII Galaxy Nexus Galaxy Note |
Please don't reflash the bootloader or unusual partitions (EFS, etc) | Lend them to be able to communicate through the 36C3 phone network |
| Person | Hardware | Comments | Usage |
|---|---|---|---|
| GNUtoo | Serial port cable with variable resistors | Needed for Replicant 9 or GNU/Linux | |
| Screwdriver | Needed by dllud | ||
| Multimeter | Can debug the serial cable if necessary | ||
| Simtrace 1: Can get the dialog between the modem and the SIM card in wireshark | simtrace packaged in Parabola, please do not reflash or trigger the erase jumper (requires old compiler to recompile the firmware) | Do we do demos with it ? | |
| SIM card that is not recognized in Replicant (STK related?) | Testing | ||
| SIM card + phone that can trigger the audio call issue | Testing | ||
| 5 CCC Camp 2019 SIM cards | I've the ADM1 PIN and such if you want to play with it, but I don't have good transportable smartcard reader (only bad transportable or good not transportable) | Will be lent to use the 36C3 phone network |
| Person | Hardware | Comments | Usage |
|---|---|---|---|
| GNUtoo | Blank stickers for labeling the hardware | * Put your name, table, and contact information on the hardware you lend to more easily find you when we need to give it back to you * Put constraints and usage notes on hardware (pinout, settings, what not to reflash) |
|
| FSF | Replicant stickers | Giving some to the attendees |