Actions
36c3 » History » Revision 1
Revision 1/17
| Next »
Denis 'GNUtoo' Carikli, 12/12/2019 02:11 PM
Add initial hardware
36c3¶
Hardware to bring¶
Devices¶
Good practices:- It would be a good idea to put your name on a sticker somewhere on the device if possible
| Person | Hardware | Comments | Usage |
|---|---|---|---|
| GNUtoo | Galaxy SIII (I9300) with the stock bootloader | Please don't reflash the bootloader | Can run Replicant 6.0 |
| Galaxy SIII (I9300) with the stock (signed) OS | Please don't reflash the bootloader or unusual partitions (EFS, etc) | Will be used for demos at the stand: We will monitor what is transmited on the network | |
| Galaxy SIII (I9300) with u-boot | Please don't reflash the modem partitions (EFS, MODEM) | Can run Replicant 9 and GNU/Linux | |
| Other Replicant 6.0 compatible phones: Galaxy SII Galaxy Nexus Galaxy Note |
Please don't reflash the bootloader or unusual partitions (EFS, etc) | Lend them to be able to communicate through the 36C3 phone network |
Debug utilities¶
| Person | Hardware | Comments | Usage |
|---|---|---|---|
| GNUtoo | Serial port cable with variable resistors | ||
| Screwdriver | Needed by dllud | ||
| Multimeter | |||
| Simtrace 1: Can get the dialog between the modem and the SIM card in wireshark | |||
| SIM card that is not recognized in Replicant (STK related?) | Test on Replicant 4.2 and on Replicant 6.0 | ||
| SIM card + phone that can trigger the audio call issue | |||
| 5 CCC Camp 2019 SIM cards | Will be lent to use the 36C3 phone network |
Updated by Denis 'GNUtoo' Carikli over 5 years ago · 1 revisions