Replicant

h1. 36C3

h2. Presentations

All presentations are available at the [[Presentations#36C3]] page, alongside with slide-decks and videos (if available).

h2. Hardware to bring

h3. Devices

Good practices:

* It would be a good idea to put your name on a sticker somewhere on the device if possible

|_. Person |_. Hardware |_. Comments |_. Usage |

|/4. GNUtoo | Galaxy SIII (I9300) with the stock bootloader | Please don't reflash the bootloader or unusual partitions (EFS, etc) | Can run Replicant 6.0 => Can be lent or used for demos |

| Galaxy SIII (I9300) with the stock (signed) OS | Please don't reflash the bootloader or unusual partitions (EFS, etc) | Will be used for demos at the stand: We will monitor what is transmited on the network |

| Galaxy SIII (I9300) with u-boot | Please don't reflash the modem partitions (EFS, MODEM) | Can run Replicant 9 and GNU/Linux |

| Other Replicant 6.0 compatible phones:

Galaxy SII

Galaxy Nexus

Galaxy Note | Please don't reflash the bootloader or unusual partitions (EFS, etc) | Lend them to be able to communicate through the 36C3 phone network |

h3. Debug utilities

|_. Person |_. Hardware |_. Comments |_. Usage |

|/7. GNUtoo | Serial port cable with variable resistors | | Needed for Replicant 9 or GNU/Linux |

| Screwdriver | | Needed by dllud |

| Multimeter | | Can debug the serial cable if necessary |

| Simtrace 1: Can get the dialog between the modem and the SIM card in wireshark | simtrace packaged in Parabola, please do not reflash or trigger the erase jumper (requires old compiler to recompile the firmware) | Do we do demos with it ? |

| SIM card that is not recognized in Replicant (STK related?) | | Testing |

| SIM card + phone that can trigger the audio call issue | | Testing |

| 5 CCC Camp 2019 SIM cards | I've the ADM1 PIN and such if you want to play with it, but I don't have good transportable smartcard reader (only bad transportable or good not transportable) | Will be lent to use the 36C3 phone network |

h3. Other:

|_. Person |_. Hardware |_. Comments |_. Usage |

| GNUtoo | Blank stickers for labeling the hardware | | * Put your name, table, and contact information on the hardware you lend to more easily find you when we need to give it back to you

* Put constraints and usage notes on hardware (pinout, settings, what not to reflash) |

| FSF | Replicant stickers | | Giving some to the attendees |