I9100GBootloader¶

Unsigned versions¶

TODO

Signed versions¶

To get the bootrom to try to boot on USB, you need to do the following:

Connect the USB cable to the device but make sure it's not connected on the computer.
Power off the device
Connect the USB cable

If we do that, we get the following in the kernel log of your laptop:

usb 1-1: new high-speed USB device number 24 using ehci-pci
usb 1-1: unable to get BOS descriptor or descriptor too short
usb 1-1: New USB device found, idVendor=0451, idProduct=d00f, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=33, Product=37, SerialNumber=0
usb 1-1: Product: OMAP4430
usb 1-1: Manufacturer: Texas Instruments

We can also try to get a bit more infos with omap-usb-boot:

$ sudo omap-usb-boot -v -w boot invalidbootmedia
Finding and opening USB device
Found and opened omap4 USB device: OMAP4430
ASIC device id: 4430, HS device
Booting from device invalidbootmedia...
Booting device invalidbootmedia not found
Booting from device failed

Here we know the device is signed because it's a "HS device".
If it was not signed it would print "GP device" instead.

Source code¶

https://github.com/hpagseddy/i9100g_xloader This got rebuilt and flashed, and it worked on the device it was tested on.
https://blog.the-leviathan.ch/?p=408

TODO¶

Understand how to get unsigned versions (Android version, serial number, etc)
Get a device with u-boot and ask samsung for source code