Galaxy S Installation¶

Prerequisites¶

• Your device must run Android 2.3 (we cannot use the 2.2 partition layout)
• Your device must be ready to run CyanogenMod (see http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide)
• It is a good idea to flash CyanogenMod before Replicant as it'll solve possible issues with the modem image (it must be located at /radio/modem.bin and symlinked to /dev/block/bml12)

Download the files¶

• Refer to the GalaxyS page to find a link to the latest images (Last image part of the table).
• Download the images and the md5 checksum
• Download heimdall: http://www.glassechidna.com.au/products/heimdall/

Copy the files to the device¶

Using the internal memory¶

1. Mount usb storage from the current system of your Galaxy S phone
2. Create a directory at the root of the usb storage
3. Copy the downloaded images and md5 checksum to this directory

Using a µSD card¶

1. Mount the µSD card, make sure it's fat32
2. Create a directory at the root of the µSD card
3. Copy the downloaded images and md5 checksum to this directory

Prepare the phone¶

1. Turn the phone completely off, remove any connected cable
2. Boot in "Download" mode by holding VOL-, Select and Power buttons together
3. Connect a microUSB cable to the phone
4. Flash recovery image with heimdall:
   

   ./heimdall flash --kernel path/to/recovery.img