h1. Galaxy S Installation

h2. Prerequisites 

* Your device must run Android 2.3 (we cannot use the 2.2 partition layout)
* Your device must be ready to run CyanogenMod (see http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide)
* It is a good idea to flash CyanogenMod before Replicant as it'll solve possible issues with the modem image (it must be located at /radio/modem.bin and symlinked to /dev/block/bml12)

h2. Download the files

* Refer to the [[GalaxyS]] page to find a link to the latest images (@Last image@ part of the table).
* Download the images and the md5 checksum
* Download heimdall: http://www.glassechidna.com.au/products/heimdall/

h2. Copy the files to the device

h3. Using the internal memory 

# Mount usb storage from the current system of your Galaxy S phone
# Create a directory @at the root@ of the usb storage
# Copy the downloaded images @and md5 checksum@ to this directory

h3. Using a µSD card

# Mount the µSD card, make sure it's fat32
# Create a directory @at the root@ of the µSD card
# Copy the downloaded images @and md5 checksum@ to this directory

h2. Prepare the phone

# Turn the phone completely off, remove any connected cable
# Boot in "Download" mode by holding VOL-, Select and Power buttons together
# Connect a microUSB cable to the phone
# Flash recovery image with heimdall:
<pre>
./heimdall flash --kernel path/to/recovery.img
</pre>

h2. Flash the images

# Select @flash images@
# Choose the location of the images (internal sdcard is the actual sdcard)
# Confirm flash
# Get back to the general menu
# Select @mounts and storage@
# Select @format /datadata@
# Confirm format
# Reboot

@Your device is now running Replicant!@