GalaxySIIIGTI9300 » History » Revision 71
Revision 70 (Denis 'GNUtoo' Carikli, 02/29/2020 03:21 PM) → Revision 71/98 (Denis 'GNUtoo' Carikli, 02/29/2020 03:28 PM)
h1. Galaxy S III (GT-I9300)
{{>toc}}
|/9. !galaxys3.png! | *Device* | Galaxy S III (GT-I9300) |
| *Manufacturer* | Samsung |
| *Release date* | May 2012 |
| *Codename* | @i9300@ |
| *Status* | Maintained |
|/2. *Maintainer(s)* | [[People#Paul-Kocialkowski|Paul Kocialkowski]] |
| [[People#Wolfgang-Wiedmeyer|Wolfgang Wiedmeyer]] |
| *Supported models* | GSM: GT-I9300 |
| *Latest images* | [[ReplicantImages#Replicant-60-0003-images|Replicant 6.0 0003]] |
h2. Replicant status
Replicant status for the Galaxy S III (GT-I9300): [[ReplicantStatus#Replicant-60|ReplicantStatus Replicant 6.0]]
h2. Replicant installation
To install Replicant on the Galaxy S III (GT-I9300), see the [[RecoveryInstallationWithHeimdall]] and [[MinorVersionUpgrade]] wiki pages.
h2. Replicant usage
* Galaxy S III (GT-I9300) compass calibration: [[GalaxyS3I9300CompassCalibration]]
h2. Replicant build
Replicant build for the Galaxy S III (GT-I9300): [[GalaxyS3I9300Build]]
h2. Replicant development
* Galaxy S III (GT-I9300) UART: [[GalaxyS3I9300UART]]
h2. Freedom and privacy/security evaluation
See [[GalaxyS3I9300PrivacySecurityEvaluation]] for more details.
h2. Research
h3. Hardware table
|_. Component |_. Name |_. Source |_. Status |
| SoC | Samsung Exynos 4412 | "iFixit":http://www.ifixit.com/Teardown/Samsung+Galaxy+S+III+Teardown/9391/2 | Linux kernel support |
| GPU | Mali 400 | "wikipedia":https://secure.wikimedia.org/wikipedia/en/wiki/Exynos | Linux kernel and secret userspace |
| Audio Codec | WM8994 | Linux kernel | Linux kernel support (ALSA) |
| Modem | XMM6260 | Linux kernel | Free userspace implementation: [[Samsung-RIL]]/[[libsamsung-ipc]] |
| Wi-Fi | BCM4334 | Linux kernel | Linux kernel support, proprietary loaded firmware |
| Bluetooth | BCM4334 | Linux kernel | Linux kernel support, proprietary loaded firmware |
| NFC | PN544 | Linux kernel | Linux kernel support |
| GPS | BCM47511 | "iFixit":http://www.ifixit.com/Teardown/Samsung+Galaxy+S+III+Teardown/9391/2 | Proprietary userspace, no free implementation: [[BCM4751]] |
| Accelerometer | LSM330DLC | Linux kernel | Linux kernel support, free userspace |
| Compass | AKM8975 | Kernel sources | Linux kernel support, free userspace |
| Light/proximity sensor | CM36651 | Kernel sources | Linux kernel support, free userspace |
| Gyroscope | LSM330DLC | Kernel sources | Linux kernel support, free userspace |
| Barometer | LPS331AP | Kernel sources | Linux kernel support, free userspace |
| Camera (back) | S5C73M3 | Linux kernel | Linux kernel support, free userspace |
| Camera (front) | S5K6A3 | Linux kernel | Linux kernel support, free userspace, proprietary loaded firmware |
h3. Software Configuration
h4. PIT
The PIT of a 16G version of the * [[GalaxyS3I9300Pit]]: Galaxy SIII S III (GT-I9300) can be found in the [[GalaxyS3I9300Pit]] page.
The PIT is a (a partition table used at least by the bootloader in the odin mode that Heimdal uses.
If we look at the BOTA0 partition entry in the PIT we have:
<pre>
--- Entry #4 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 1
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 8192
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOTA0
Flash Filename: -
FOTA Filename:
</pre>
<pre>
Binary Type: 0 (AP)
</pre>
AP probably means application processor which means that the partition is used by the CPU running Android, and not the modem.
<pre>
Partition Block Size/Offset: 8192
Partition Block Count: 8192
</pre>
This is in blocks of 512 bytes.
<pre>
Partition Name: BOTA0
</pre>
<pre>
Identifier: 1
</pre>
That identifier seem to be increased at each next partition, bit it is different for the PIT partitions that are on the mmcblk0boot0 partition for instance.
h4. GPT
The mmcblk0 block device also has a GPT.
table)
h4. Partitions
|_. PIT |_. Linux name |_. block device |_. mount point |_. partition type |_. Description |_. size @ 16G |
| BOOTLOADER |/2\3. mmcblk0boot0, not visible on Replicant 6.0 | Unknown, raw data? | The bootloader? |/2. 4M |
| TZSW | Unknown, raw data? | The signed TrustZone OS |
| Not visible in the PIT |\3. mmcblk0boot1, not visible on Replicant 6.0 | empty | Unused | 4M |
| PIT |\3. Not visible on Replicant 6.0, location unknown |\2. The PIT partition table |
| MD5HDR |\3. Not visible on Replicant 6.0, location unknown | Unknown, raw data? | Used during boot to validate partitions? |
|\2. BOTA0 | mmcblk0p1 |/2. None |/2. empty |/2. ? |/2. 4"MiB":https://en.wikipedia.org/wiki/Mebibyte |
|\2. BOTA1 | mmcblk0p2 |
|\2. EFS | mmcblk0p3 | /efs | ext4 | modem data partition | 20M |
|\2. PARAM | mmcblk0p4 | None | tar file, can be unpacked with gnu tar | * Bootloader settings[1]
* Boot modes[1]
* Splash screen[1]
* several JPGs regarding download mode, loading empty battery, hardware/watchdog reset and other | 8M |
|\2. BOOT | mmcblk0p5 | None | bootimage (mkbootimg) | boot.img partition | 8M |
|\2. RECOVERY | mmcblk0p6 | None | bootimage (mkbootimg) | recovery partition | 8M |
|\2. RADIO | mmcblk0p7 | None | Unknown, raw data? | Modem OS partition | 32M |
|\2. CACHE | mmcblk0p8 | /cache | f2fs | cache partition | 1G |
|\2. SYSTEM | mmcblk0p9 | /system | ext4 | system partition | 1.5G |
|\2. HIDDEN | mmcblk0p10 | /preload | ext4 | Samsung promotional medias:
* Over_the_horizon.mp3
* Wonders_of_Nature.mp4 | 560M |
|\2. OTA | mmcblk0p11 | None | empty | probably only used during OTA updates? | 8M |
|\2. USERDATA | mmcblk0p12 | /data | ext4 | data partition | 11.5G |
fn1. According to "a forum thread on XDA developers":https://forum.xda-developers.com/showthread.php?t=1986887 "About Params: The params contains the splash screens you see when you turn your phone on and settings which control boot. These settings include UART output, kernel parmeters, and boot modes."
h2. Schematics
h3. FCC
*FCC ID*: A3LGTI9300A (Grantee code: A3L, Product code: GTI9300A)
*URL*: https://www.fcc.gov/oet/ea/fccid/ Enter grantee, and product code and click on search.
*Schematics*: Block diagram operational description and schematics not made public through the FCC.
h3. Ifixit
*Device URL*: https://www.ifixit.com/Device/Samsung_Galaxy_S_III#Section_Documents
*Repair manuals and very partial schematics*: https://www.ifixit.com/Device/Samsung_Galaxy_S_III#Section_Documents