GalaxyTab2AndGalaxyNexusBootloaderFreedom » History » Revision 3
Revision 2 (Denis 'GNUtoo' Carikli, 02/02/2020 11:51 PM) → Revision 3/9 (Denis 'GNUtoo' Carikli, 02/03/2020 12:15 AM)
h1. GalaxyTab2Bootloader h2. Under some conditions, On a Galaxy Tab 2 7" GSM To get 7.0 GSM, the bootrom seem to try to boot on USB, you need to do the following: * Connect the USB cable to the device but make sure it's not connected on the computer. first: * Power off the device * Connect the USB cable If we do that, we get the following in the kernel log of your laptop: </pre> usb 1-1: new high-speed USB device number 6 using ehci-pci usb 1-1: unable to get BOS descriptor or descriptor too short usb 1-1: New USB device found, idVendor=0451, idProduct=d00f, bcdDevice= 0.00 usb 1-1: New USB device strings: Mfr=33, Product=37, SerialNumber=0 usb 1-1: Product: OMAP4430 usb 1-1: Manufacturer: Texas Instruments usb 1-1: USB disconnect, device number 6 </pre> We can also try to get a bit more infos with omap-usb-boot: <pre> omap-usb-boot -w -v load u-boot.img Finding and opening USB device Found and opened omap4 USB device: OMAP4430 ASIC device id: 4430, HS device Loading and executing u-boot.img... Loading data with length 369176 bytes Bulk USB transfer failed Loading and executing failed </pre> Here we know the device is signed because it's a "HS device". If it was not signed it would print "GP device" instead.