h1. GalaxyTabSerial

{{toc}}

h2. Movitelonline "Cable UART Dual Samsung Galaxy Tab P1000 / Tab 2 / Note / Note 2 [RJ45 + USB]"

*link*: "shop page":https://www.movitelonline.com/b2c/producto/RJ45-USB-UNIBOX-CABLE-SAMSUNG-GALAXY-TAB-GT-P1000/1/cable-uart-dual-samsung-galaxy-tab-p1000-tab-2-note-note-2-rj45-usb-
*Exported pins*: USB D+, USB D-, USB VCC, USB GND, UART RX, UART TX. The ID pin isn't exported.

The USB cable can be plugged in a regular computer.

The RX and TX and GND are exported on the RJ45 cable.



With the clip on the bottom, we have:

<pre>
+-----------------------------------------------------+
| [] [] [RX or TX?] [RX or TX?] [] [] [] [GND] [] []  |
|                                                     |
|                                                     |
|                                                     |
|                                                     |
|                                                     |
|                                                     |
|                                                     |
.......................................................
                   |            |
                   |            |
                   |            |
                   |            |
                   |            |
                   |            |
                   |            |
                   |            |

</pre>

TODO: Test RX and TX, to what are they exported? The modem? The SOC?

h2. REferences

* The "Galaxy Tab Serial Cable thread":https://forum.xda-developers.com/showthread.php?t=1010314 on XDA. It also contains some pinout for the 30 pin connector. The information there seem valid for many tablets including N5100, and potentially the Galaxy Tab 2 too.