h1. I9250Bootloader

<pre>
��====== VCELL : 409625, SOC : 100, nType : 4 ======
[Charger] nScaledVCELL : 409625000, nDesriedSOC, : 98, nMaxSOC : 118, nMinSOC : 78
* FB base addr = 0xbea70000!
* PANEL_S6E8AA0_ID_READ : 0x12, 0x8e, 0x9b.
[ omap_power_get_reset_source :47]	 PRM_RSTST : 0x2

Autoboot (1 seconds) in progress, press any key to stop .

Autoboot aborted..
SBL> 
SBL> 
SBL> 
SBL> h��lp
command_loop: parse command error! (h��lp)
SBL> help
Following commands are supported:
* setenv
* saveenv
* printenv
* help
* reset
* boot
* kernel
* loadpart
* loadkernel
* erasepart
* omap_upload_rdx
* omap_test_button
* omap_test_hwinfo
* omap_set_gpio_level
* omap_get_gpio_level
* omap_test_twl6030
* omap_test_power
* omap_reboot
* omap_halt
* omap_cmdline_power
* omap_test_kbd
* omap_test_usbacc
* usb
* omap_test_max17043
* omap_test_fsa9480
* omap_dump_sec_log_buf
* omap_test_sud
To get commands help, Type "help <command>"
SBL> 

</pre>