Librem5Phone » History » Version 7
dl lud, 01/26/2020 08:14 PM
| 1 | 1 | Denis 'GNUtoo' Carikli | h1. Librem5 |
|---|---|---|---|
| 2 | |||
| 3 | |_. Component | Comments | |
||
| 4 | 3 | Denis 'GNUtoo' Carikli | | Processor: iMX8M Quad CPU | * See "this post":https://puri.sm/posts/librem5-solving-the-first-fsf-ryf-hurdle/ about the nonfree DDR4 controller firmware |
| 5 | 4 | Denis 'GNUtoo' Carikli | * Does it require a nonfree firmware to use the HDMI? |
| 6 | * Does the device have HDMI ? |
||
| 7 | 1 | Denis 'GNUtoo' Carikli | * The bootloader will most probably be fully free and redistributable by Replicant | |
| 8 | | Display : 5.5″ – 5.7″ HD display |
||
| 9 | 6 | Denis 'GNUtoo' Carikli | Memory: 3GB RAM | TODO: |
| 10 | * Check the if the Android 9 requirements are met | |
||
| 11 | 1 | Denis 'GNUtoo' Carikli | | Wireless : 802.11abgn 2.4 Ghz / 5Ghz + Bluetooth 4 | TODO: |
| 12 | * What chips are used? | |
||
| 13 | | Baseband : Gemalto PLS8 3G/4G modem w/ single sim on replaceable M.2 card | TODO: |
||
| 14 | * What protocols are used ? | |
||
| 15 | | GPS : TESEO LIV3F multiconstellation GNSS receiver | TODO: |
||
| 16 | * What protocol are used | |
||
| 17 | | Smartcard: yes for 2FF format smart cards | TODO: |
||
| 18 | * How is it connected? |
||
| 19 | * What Android frameworks do exist for smartcards | |
||
| 20 | | Front Camera: TBD | TODO: |
||
| 21 | * What chips will be used? | |
||
| 22 | | Back Camera w/LED flash: TBD | TODO: |
||
| 23 | * What chips will be used? | |
||
| 24 | | Charging: USB C connector for charging, USB client function, USB host function, power delivery | TODO: |
||
| 25 | * What USB version will be used? | |
||
| 26 | |||
| 27 | 7 | dl lud | h2. Schematics |
| 28 | |||
| 29 | https://source.puri.sm/Librem5/l5-schematic/ |
||
| 30 | |||
| 31 | h2. References |
||
| 32 | 1 | Denis 'GNUtoo' Carikli | |
| 33 | * https://shop.puri.sm/shop/librem-5/ |
||
| 34 | 5 | Denis 'GNUtoo' Carikli | * https://puri.sm/posts/librem-5-smartphone-final-specs-announced/ |