Libsamsung-ril » History » Revision 6
      « Previous |
    Revision 6/48
      (diff)
      | Next »
    
    Denis 'GNUtoo'  Carikli, 01/14/2012 09:11 PM 
    add samsung ril part
    
samsung-ril¶
The samsung ril is the library that interfaces libsamsung-ipc(see below) with the android framework.
Status per devices below:
Nexus S
| Functionality | Status | 
| Data activation | Working | 
| Data deactivation | |
| Calls with audio | working | 
| SMS | working | 
libsamsung-ipc¶
libsamsung-ipc is a free implementation of the protocol to speak with modems found in most Samsung devices. It is the low-level library used to communicate with the modem and needs an upper-layer (RIL) to interface with the system.
libsamsung-ipc is shared between SHR and Replicant projects. It's used in both for the Nexus S.
Source code is available under the GPLv3+ at: https://github.com/morphis/libsamsung-ipc (master branch).
The library is mostly complete
ipc-modemctrl¶
ipc-modemctrl is a deprecated tool that was used at the beginning of the work for talking to the nexus S modem. It implemented basic functionalities (mostly SIM unlocking and network registration).
Usage:
usage: ipc-modemctrl <command>
commands:
    start                 bootstrap modem and start read loop
    power-on              power on the modem
    power-off             power off the modem
arguments:
    --debug               enable debug messages
    --pin=[PIN]           provide SIM card PIN
	Please run ipc-modemctrl like this (from host pc): 
assuming your SIM PIN is 1234. If you don't have any SIM pin, don't pass the --pin argument. It should go like this: <pre> [I] Got SIM PIN! r0 Starting modem on FMT client r1 Starting modem_read_loop on FMT client r2 Phone is powered up (LPM)! [I] SIM card found [I] SIM is initializing r3 SIM init complete r4 Modem is ready, requesting normal power mode [I] SIM card found [I] SIM is initializing r3 SIM init complete r5 Modem is fully ready [I] Registered with network successfully! r6 Registered with network! Got PLMN (Mobile Network Code): '20810' [I] Registered with network successfully! r6 Registered with network! Got PLMN (Mobile Network Code): '20810' [I] Registered with network successfully! [I] Registered with network successfully! r6 Registered with network! Got PLMN (Mobile Network Code): '20810' [I] SIM Phone Book init complete </pre> <pre> h2. Status We were able to make the following work: * SMS (Rx/Tx) * Call (Rx/Tx) BUT NO AUDIO YET * GPRS * SIM I/O (stored contacts, etc) * SIM PIN unlocking
Updated by Denis 'GNUtoo' Carikli almost 14 years ago · 6 revisions