Replicant

h1. samsung-ril

The samsung ril is the library that interfaces libsamsung-ipc(see below) with the android framework.

Status per devices below:

h2. Nexus S

| Functionality | Status | 

| Data activation | Working since trunk of 14/01/2012| 

| Data deactivation | Work in progress(partially working) |

| Calls with audio | working in the image 0002 (replicant 2.3) | 

| SMS | working in the image 0002 (replicant 2.3) | 

| DTMF | Work in progress(partially working) | 

h1. libsamsung-ipc

libsamsung-ipc is a free implementation of the protocol to speak with modems found in most Samsung devices. It is the low-level library used to communicate with the modem and needs an upper-layer (RIL) to interface with the system.

libsamsung-ipc is shared between SHR and Replicant projects. It's used in both for the Nexus S.

Source code is available under the GPLv3+ at: https://github.com/morphis/libsamsung-ipc (master branch).

The library is mostly complete

h2. ipc-modemctrl

ipc-modemctrl is a deprecated tool that was used at the beginning of the work for talking to the nexus S modem. It implemented basic functionalities (mostly SIM unlocking and network registration).

Usage:

<pre>

usage: ipc-modemctrl <command>

commands:

	start                 bootstrap modem and start read loop

	power-on              power on the modem

	power-off             power off the modem

arguments:

	--debug               enable debug messages

	--pin=[PIN]           provide SIM card PIN

</pre>

Please run ipc-modemctrl like this (from host pc): 

<pre>

assuming your SIM PIN is 1234. If you don't have any SIM pin, don't pass the --pin argument. 

It should go like this:

<pre>

[I] Got SIM PIN!

r0 Starting modem on FMT client

r1 Starting modem_read_loop on FMT client

r2 Phone is powered up (LPM)!

[I] SIM card found

[I] SIM is initializing

r3 SIM init complete

r4 Modem is ready, requesting normal power mode

[I] SIM card found

[I] SIM is initializing

r3 SIM init complete

r5 Modem is fully ready

[I] Registered with network successfully!

r6 Registered with network! Got PLMN (Mobile Network Code): '20810'

[I] Registered with network successfully!

r6 Registered with network! Got PLMN (Mobile Network Code): '20810'

[I] Registered with network successfully!

[I] Registered with network successfully!

r6 Registered with network! Got PLMN (Mobile Network Code): '20810'

[I] SIM Phone Book init complete

</pre>

<pre>

h2. Status

We were able to make the following work:

* SMS (Rx/Tx)

* Call (Rx/Tx) BUT NO AUDIO YET

* GPRS 

* SIM I/O (stored contacts, etc)

* SIM PIN unlocking