Replicant

h1. Pinephone

|_. Specification |_. comments |_. TODO |

| Allwinner A64 Quad Core SOC | * The bootloader should be fully free software | TODO:

* confirm if the bootloader is fully free software

* Check upstream u-boot A64 status |

| with Mali 400 MP2 GPU[1] | 

* Has some (early) support in Linux 5.2 | TODO: 

* Regularly check kernel and MESA status |

| Quectel EG-25G[1][2] with worldwide bands | * The EG-25G is an international version of the EC25

* It probably runs GNU/Linux too but we need to confirm that | TODO:

* How supported is the AT support?

* How supported is the QMI the protocol?

* What's the similarity with the EC-25? |

| WiFi: RTL8723BS?[2] | | TODO:

* TODO: check if it requires a loadable nonfree firwmare? |

| USB – C (Power, Data and Video Out) | | TODO:

* Which USB version is used ?

* Does it also give access to the serial port |

| 2GB of LPDDR3 RAM

 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) | | TODO:

* Check if it meets Android 9 requirements |

| Bluetooth: 4.0, A2DP | | TODO:

* Which chip is used?

* Does it require a firmware update ? |

| GNSS: GPS, GPS-A, GLONASS | | TODO:

* Which chip is used? |

| Main Camera: Single OV6540, 5MP, 1/4″, LED Flash | | TODO:

* Check if it requires a loadable firmware |

| Selfie Camera: Single GC2035, 2MP, f/2.8, 1/5″ | | TODO:

* Check if it requires a loadable firmware |

| Bootable Micro SD

 16GB eMMC | | TODO:

* What's the boot order ? |

| Sensors: accelerator, gyro, proximity, compass, barometer, ambient light | | TODO:

* What chips are used |

h2. References.

fn1. Some of the specifications are available on the "device page":https://www.pine64.org/pinephone/ 

fn2. See "this mail":https://lists.osuosl.org/pipermail/replicant/2019-July/001997.html for the reference.