Actions
PinePhonev1x » History » Revision 15
« Previous |
Revision 15/69
(diff)
| Next »
Denis 'GNUtoo' Carikli, 07/14/2019 01:51 PM
Pinephone¶
| Specification | comments | TODO |
|---|---|---|
| Allwinner A64 Quad Core SOC1 | * The bootloader should be fully free software | TODO: * confirm if the bootloader is fully free software * Check upstream u-boot A64 status |
| with Mali 400 MP2 GPU1 | * Has some (early) support in Linux 5.2 | TODO: * Regularly check kernel and MESA status |
| Quectel EG-25G1[2] with worldwide bands | * The EG-25G is an international version of the EC25 * It probably runs GNU/Linux too but we need to confirm that |
TODO: * How supported is the AT support? * How supported is the QMI the protocol? * What's the similarity with the EC-25? |
| WiFi: RTL8723BS?[2] | TODO: * TODO: check if it requires a loadable nonfree firwmare? |
|
| USB – C (Power, Data and Video Out)[1] | TODO: * Which USB version is used ? * Does it also give access to the serial port |
|
| 2GB of LPDDR3 RAM 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) |
TODO: * Check if it meets Android 9 requirements |
|
| Bluetooth: 4.0, A2DP1 | TODO: * Which chip is used? * Does it require a firmware update ? |
|
| GNSS: GPS, GPS-A, GLONASS1 | TODO: * Which chip is used? |
|
| Main Camera: Single OV6540, 5MP, 1/4″, LED Flash1 | TODO: * Check if it requires a loadable firmware |
|
| Selfie Camera: Single GC2035, 2MP, f/2.8, 1/5″[1] | TODO: * Check if it requires a loadable firmware |
|
| Bootable Micro SD1 16GB eMMC1 |
TODO: * What's the boot order ? |
|
| Sensors: accelerator, gyro, proximity, compass, barometer, ambient light1 | TODO: * What chips are used |
References.¶
1 Some of the specifications are available on the device page
2 See this mail for the reference.
Updated by Denis 'GNUtoo' Carikli almost 6 years ago · 15 revisions