PinePhonev1x » History » Revision 15
Revision 14 (Denis 'GNUtoo' Carikli, 07/14/2019 01:49 PM) → Revision 15/69 (Denis 'GNUtoo' Carikli, 07/14/2019 01:51 PM)
h1. Pinephone |_. Specification |_. comments |_. TODO | | Allwinner A64 Quad Core SOC[1] | * The bootloader should be fully free software | TODO: * confirm if the bootloader is fully free software * Check upstream u-boot A64 status | | with Mali 400 MP2 GPU[1] | * Has some (early) support in Linux 5.2 | TODO: * Regularly check kernel and MESA status | | Quectel EG-25G[1][2] with worldwide bands | * The EG-25G is an international version of the EC25 * It probably runs GNU/Linux too but we need to confirm that | TODO: * How supported is the AT support? * How supported is the QMI the protocol? * What's the similarity with the EC-25? | | WiFi: RTL8723BS?[2] | | TODO: * TODO: check if it requires a loadable nonfree firwmare? | | USB – C (Power, Data and Video Out)[1] | | TODO: * Which USB version is used ? * Does it also give access to the serial port | | 2GB of LPDDR3 RAM 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) | | TODO: * Check if it meets [[HardwareRequirements|Android Android 9 requirements]] requirements | | Bluetooth: 4.0, A2DP[1] | | TODO: * Which chip is used? * Does it require a firmware update ? | | GNSS: GPS, GPS-A, GLONASS[1] | | TODO: * Which chip is used? | | Main Camera: Single OV6540, 5MP, 1/4″, LED Flash[1] | | TODO: * Check if it requires a loadable firmware | | Selfie Camera: Single GC2035, 2MP, f/2.8, 1/5″[1] | | TODO: * Check if it requires a loadable firmware | | Bootable Micro SD[1] 16GB eMMC[1] | | TODO: * What's the boot order ? | | Sensors: accelerator, gyro, proximity, compass, barometer, ambient light[1] | | TODO: * What chips are used | h2. References. fn1. Some of the specifications are available on the "device page":https://www.pine64.org/pinephone/ fn2. See "this mail":https://lists.osuosl.org/pipermail/replicant/2019-July/001997.html for the reference.