PinePhonev1x » History » Version 16
Denis 'GNUtoo' Carikli, 08/04/2019 12:46 PM
Update WiFi + Bluetooth
| 1 | 1 | Denis 'GNUtoo' Carikli | h1. Pinephone |
|---|---|---|---|
| 2 | |||
| 3 | 5 | Denis 'GNUtoo' Carikli | |_. Specification |_. comments |_. TODO | |
| 4 | 14 | Denis 'GNUtoo' Carikli | | Allwinner A64 Quad Core SOC[1] | * The bootloader should be fully free software | TODO: |
| 5 | 12 | Denis 'GNUtoo' Carikli | * confirm if the bootloader is fully free software |
| 6 | 1 | Denis 'GNUtoo' Carikli | * Check upstream u-boot A64 status | |
| 7 | 13 | Denis 'GNUtoo' Carikli | | with Mali 400 MP2 GPU[1] | * Has some (early) support in Linux 5.2 | TODO: |
| 8 | 12 | Denis 'GNUtoo' Carikli | * Regularly check kernel and MESA status | |
| 9 | 10 | Denis 'GNUtoo' Carikli | | Quectel EG-25G[1][2] with worldwide bands | * The EG-25G is an international version of the EC25 |
| 10 | 11 | Denis 'GNUtoo' Carikli | * It probably runs GNU/Linux too but we need to confirm that | TODO: |
| 11 | 5 | Denis 'GNUtoo' Carikli | * How supported is the AT support? |
| 12 | * How supported is the QMI the protocol? |
||
| 13 | 1 | Denis 'GNUtoo' Carikli | * What's the similarity with the EC-25? | |
| 14 | 16 | Denis 'GNUtoo' Carikli | | WiFi: -RTL8723BS?[2]- RTL8723CS[3] | | TODO: |
| 15 | * Requires a nonfree loadable firmware[3] | |
||
| 16 | | Bluetooth: 4.0, A2DP[1]: RTL8723CS[3] | * It uses a nonfree firmware[3]. |
||
| 17 | TODO: |
||
| 18 | * Check if it really requires that firmware or if it has some rom code that could be used ? | |
||
| 19 | 14 | Denis 'GNUtoo' Carikli | | USB – C (Power, Data and Video Out)[1] | | TODO: |
| 20 | 7 | Denis 'GNUtoo' Carikli | * Which USB version is used ? |
| 21 | 15 | Denis 'GNUtoo' Carikli | * Does it also give access to the serial port | |
| 22 | 14 | Denis 'GNUtoo' Carikli | | 2GB of LPDDR3 RAM |
| 23 | 1 | Denis 'GNUtoo' Carikli | 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) | | TODO: |
| 24 | * Check if it meets [[HardwareRequirements|Android 9 requirements]] | |
||
| 25 | 14 | Denis 'GNUtoo' Carikli | | GNSS: GPS, GPS-A, GLONASS[1] | | TODO: |
| 26 | 1 | Denis 'GNUtoo' Carikli | * Which chip is used? | |
| 27 | 14 | Denis 'GNUtoo' Carikli | | Main Camera: Single OV6540, 5MP, 1/4″, LED Flash[1] | | TODO: |
| 28 | 1 | Denis 'GNUtoo' Carikli | * Check if it requires a loadable firmware | |
| 29 | 14 | Denis 'GNUtoo' Carikli | | Selfie Camera: Single GC2035, 2MP, f/2.8, 1/5″[1] | | TODO: |
| 30 | 1 | Denis 'GNUtoo' Carikli | * Check if it requires a loadable firmware | |
| 31 | 14 | Denis 'GNUtoo' Carikli | | Bootable Micro SD[1] |
| 32 | 16GB eMMC[1] | | TODO: |
||
| 33 | 1 | Denis 'GNUtoo' Carikli | * What's the boot order ? | |
| 34 | 14 | Denis 'GNUtoo' Carikli | | Sensors: accelerator, gyro, proximity, compass, barometer, ambient light[1] | | TODO: |
| 35 | 3 | Denis 'GNUtoo' Carikli | * What chips are used | |
| 36 | |||
| 37 | 1 | Denis 'GNUtoo' Carikli | h2. References. |
| 38 | |||
| 39 | fn1. Some of the specifications are available on the "device page":https://www.pine64.org/pinephone/ |
||
| 40 | 4 | Denis 'GNUtoo' Carikli | |
| 41 | fn2. See "this mail":https://lists.osuosl.org/pipermail/replicant/2019-July/001997.html for the reference. |
||
| 42 | 16 | Denis 'GNUtoo' Carikli | |
| 43 | fn3. From #replicant channel on Freenode: <pre>< MoeIcenowy> The Wi-Fi changed to RTL8723CS (this chip also does BT), which needs non-free firmware to be feed</pre> |