Actions
PinePhonev1x » History » Revision 18
« Previous |
Revision 18/69
(diff)
| Next »
Denis 'GNUtoo' Carikli, 08/04/2019 12:51 PM
Separate hardware component and feature + group some hardware components together
Pinephone¶
| Feature | Chip | comments | TODO |
|---|---|---|---|
| System on a chip | Allwinner A64 Quad Core SOC1 | * The bootloader should be fully free software | TODO: * confirm if the bootloader is fully free software * Check upstream u-boot A64 status |
| GPU | Mali 400 MP2 GPU1 | * Has some (early) support in Linux 5.2 | TODO: * Regularly check kernel and MESA status |
| Modem | Quectel EG-25G1[2][4] with worldwide bands | * The EG-25G is an international version of the EC25 * It probably runs GNU/Linux too but we need to confirm that |
TODO: * How supported is the AT support? * How supported is the QMI the protocol? * What's the similarity with the EC-25? |
| GNSS: GPS, GPS-A, GLONASS1[4] | |||
| WiFi | RTL8723CS3 | * Requires a nonfree loadable firmware3 | |
| Bluetooth: 4.0, A2DP1 | * It uses a nonfree firmware3. TODO: * Check if it really requires that firmware or if it has some rom code that could be used ? |
||
| USB – C (Power, Data and Video Out)[1] | TODO: * Which USB version is used ? * Does it also give access to the serial port |
||
| RAM | 2GB of LPDDR3 RAM 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) |
TODO: * Check if it meets Android 9 requirements |
|
| Main Camera | Single OV6540, 5MP, 1/4″, LED Flash1 | TODO: * Check if it requires a loadable firmware |
|
| Selfie Camera | Single GC2035, 2MP, f/2.8, 1/5″[1] | TODO: * Check if it requires a loadable firmware |
|
| Bootable Micro SD1 16GB eMMC1 |
TODO: * What's the boot order ? |
||
| Sensors accelerator, gyro, proximity, compass, barometer, ambient light1 | TODO: * What chips are used |
References.¶
1 Some of the specifications are available on the device page
2 See this mail for the reference.
3 From #replicant channel on Freenode:
< MoeIcenowy> The Wi-Fi changed to RTL8723CS (this chip also does BT), which needs non-free firmware to be feed
4 From #replicant channel on Freenode:
< MoeIcenowy> The GNSS should be also done by EG25-G
Updated by Denis 'GNUtoo' Carikli over 5 years ago · 18 revisions