Project

General

Profile

PinePhonev1x » History » Version 18

Denis 'GNUtoo' Carikli, 08/04/2019 12:51 PM
Separate hardware component and feature + group some hardware components together

1 1 Denis 'GNUtoo' Carikli
h1. Pinephone
2
3 18 Denis 'GNUtoo' Carikli
|_. Feature |_. Chip |_. comments |_. TODO |
4
| System on a chip | Allwinner A64 Quad Core SOC[1] | * The bootloader should be fully free software | TODO:
5 12 Denis 'GNUtoo' Carikli
* confirm if the bootloader is fully free software
6 1 Denis 'GNUtoo' Carikli
* Check upstream u-boot A64 status |
7 18 Denis 'GNUtoo' Carikli
| GPU | Mali 400 MP2 GPU[1] | * Has some (early) support in Linux 5.2 | TODO: 
8 12 Denis 'GNUtoo' Carikli
* Regularly check kernel and MESA status |
9 18 Denis 'GNUtoo' Carikli
| Modem |/2. Quectel EG-25G[1][2][4] with worldwide bands | * The EG-25G is an international version of the EC25
10 1 Denis 'GNUtoo' Carikli
* It probably runs GNU/Linux too but we need to confirm that | TODO:
11 11 Denis 'GNUtoo' Carikli
* How supported is the AT support?
12 1 Denis 'GNUtoo' Carikli
* How supported is the QMI the protocol?
13 5 Denis 'GNUtoo' Carikli
* What's the similarity with the EC-25? |
14 18 Denis 'GNUtoo' Carikli
| GNSS: GPS, GPS-A, GLONASS[1][4] | |
15
| WiFi |/2. RTL8723CS[3] | * Requires a nonfree loadable firmware[3] | |
16
| Bluetooth: 4.0, A2DP[1] |  * It uses a nonfree firmware[3]. 
17 14 Denis 'GNUtoo' Carikli
TODO:
18 7 Denis 'GNUtoo' Carikli
* Check if it really requires that firmware or if it has some rom code that could be used ? |
19 18 Denis 'GNUtoo' Carikli
| USB – C (Power, Data and Video Out)[1] | | | TODO:
20 1 Denis 'GNUtoo' Carikli
* Which USB version is used ?
21
* Does it also give access to the serial port |
22 18 Denis 'GNUtoo' Carikli
| RAM | 2GB of LPDDR3 RAM
23 14 Denis 'GNUtoo' Carikli
 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) | | TODO:
24 1 Denis 'GNUtoo' Carikli
* Check if it meets [[HardwareRequirements|Android 9 requirements]] |
25 18 Denis 'GNUtoo' Carikli
| Main Camera | Single OV6540, 5MP, 1/4″, LED Flash[1] | | TODO:
26 1 Denis 'GNUtoo' Carikli
* Check if it requires a loadable firmware |
27 18 Denis 'GNUtoo' Carikli
| Selfie Camera | Single GC2035, 2MP, f/2.8, 1/5″[1] | | TODO:
28 1 Denis 'GNUtoo' Carikli
* Check if it requires a loadable firmware |
29
| Bootable Micro SD[1]
30
 16GB eMMC[1] | | TODO:
31 14 Denis 'GNUtoo' Carikli
* What's the boot order ? |
32 18 Denis 'GNUtoo' Carikli
| Sensors accelerator, gyro, proximity, compass, barometer, ambient light[1] | | | TODO:
33 1 Denis 'GNUtoo' Carikli
* What chips are used |
34 14 Denis 'GNUtoo' Carikli
35 3 Denis 'GNUtoo' Carikli
h2. References.
36
37 1 Denis 'GNUtoo' Carikli
fn1. Some of the specifications are available on the "device page":https://www.pine64.org/pinephone/ 
38
39
fn2. See "this mail":https://lists.osuosl.org/pipermail/replicant/2019-July/001997.html for the reference.
40 4 Denis 'GNUtoo' Carikli
41
fn3. From #replicant channel on Freenode: <pre>< MoeIcenowy> The Wi-Fi changed to RTL8723CS (this chip also does BT), which needs non-free firmware to be feed</pre>
42 18 Denis 'GNUtoo' Carikli
43
fn4. From #replicant channel on Freenode: <pre>< MoeIcenowy> The GNSS should be also done by EG25-G</pre>