h1. Pinephone |_. Feature |_. Chip |_. comments |_. TODO | | System on a chip | Allwinner A64 Quad Core SOC[1] | * The bootloader should be fully free software | TODO: * confirm if the bootloader is fully free software * Check upstream u-boot A64 status | | GPU | Mali 400 MP2 GPU[1] | * Has some (early) support in Linux 5.2 | TODO: * Regularly check kernel and MESA status | | Modem |/2. Quectel EG-25G[1][2][4] with worldwide bands | * The EG-25G is an international version of the EC25 * It probably runs GNU/Linux too but we need to confirm that | TODO: * How supported is the AT support? * How supported is the QMI the protocol? * What's the similarity with the EC-25? | | GNSS: GPS, GPS-A, GLONASS[1][4] | | | WiFi |/2. RTL8723CS[3] | * Requires a nonfree loadable firmware[3] | | | Bluetooth: 4.0, A2DP[1] | * It uses a nonfree firmware[3]. TODO: * Check if it really requires that firmware or if it has some rom code that could be used ? | | USB – C (Power, Data and Video Out)[1] | | | TODO: * Which USB version is used ? * Does it also give access to the serial port | | RAM | 2GB of LPDDR3 RAM 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) | | TODO: * Check if it meets [[HardwareRequirements|Android 9 requirements]] | | Main Camera | Single OV6540, 5MP, 1/4″, LED Flash[1] | * Mainline driver[5] * No firmware required[5] | TODO: * Check if it requires a loadable firmware | | Selfie Camera | Single GC2035, 2MP, f/2.8, 1/5″[1] | | TODO: * Check if it requires a loadable firmware | | Bootable Micro SD[1] 16GB eMMC[1] | *Boot order:MicroSD->eMMC [6]| | | Sensors accelerator, gyro, proximity, compass, barometer, ambient light[1] | | | TODO: * What chips are used | h2. References. fn1. Some of the specifications are available on the "device page":https://www.pine64.org/pinephone/ fn2. See "this mail":https://lists.osuosl.org/pipermail/replicant/2019-July/001997.html for the reference. fn3. From #replicant channel on Freenode:
< MoeIcenowy> The Wi-Fi changed to RTL8723CS (this chip also does BT), which needs non-free firmware to be feed
fn4. From #replicant channel on Freenode:
< MoeIcenowy> The GNSS should be also done by EG25-G
fn5. From #replicant channel on Freenode:
< MoeIcenowy> The OV5640 camera doesn't need firmware and its driver is mainlined
fn6. From #replicant channel on Freenode:
The boot order is strictly MicroSD->eMMC, which is set in the A64's boot ROM