PinePhonev1x » History » Revision 5
Revision 4 (Denis 'GNUtoo' Carikli, 07/14/2019 01:18 PM) → Revision 5/69 (Denis 'GNUtoo' Carikli, 07/14/2019 01:26 PM)
h1. Pinephone |_. Specification |_. comments |_. TODO | | Allwinner A64 Quad Core SOC with Mali 400 MP2 GPU[1] | | TODO: * Check if the bootloader is fully free software * Check upstream u-boot A64 status | | Quectel EG-25G[1][2] EG-25G with worldwide bands | * The EG-25G is an international version of the EC25 * It most probably runs GNU/Linux too | TODO: * How supported is Check the AT support? protocol used * How supported is the QMI the protocol? Does it run GNU/Linux? * What's the similarity with the EC-25? | | WiFi: RTL8723BS?[2] 802.11 /b/g/n, single-band, hotspot capable | | TODO: * TODO: check if it requires a loadable nonfree firwmare? Which chip will be used? | | USB – C (Power, Data and Video Out) | | TODO: * Which USB version is used ? * Does it also give access to the serial port | | 2GB of LPDDR3 RAM 5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) | TODO: * Check if it meets Android 9 requirements | | Bluetooth: 4.0, A2DP | | TODO: * Which chip is used? * Does it require a firmware update ? | | GNSS: GPS, GPS-A, GLONASS | | TODO: * Which chip is used? | | Main Camera: Single OV6540, 5MP, 1/4″, LED Flash | TODO: * Check if it requires a loadable firmware | | Selfie Camera: Single GC2035, 2MP, f/2.8, 1/5″ | TODO: * Check if it requires a loadable firmware | | Bootable Micro SD 16GB eMMC | | TODO: * What's the boot order ? | | Sensors: accelerator, gyro, proximity, compass, barometer, ambient light | TODO: * What chips are used | h2. References. fn1. Some of the specifications are available on the "device page":https://www.pine64.org/pinephone/ fn2. See "this mail":https://lists.osuosl.org/pipermail/replicant/2019-July/001997.html for the reference.