PinePhonev1x » History » Revision 6
Revision 5 (Denis 'GNUtoo' Carikli, 07/14/2019 01:26 PM) → Revision 6/69 (Denis 'GNUtoo' Carikli, 07/14/2019 01:26 PM)
h1. Pinephone
|_. Specification |_. comments |_. TODO |
| Allwinner A64 Quad Core SOC with Mali 400 MP2 GPU[1] | | TODO:
* Check if the bootloader is fully free software
* Check upstream u-boot A64 status |
| Quectel EG-25G[1][2] with worldwide bands |
* The EG-25G is an international version of the EC25
* It most probably runs GNU/Linux too | TODO:
* How supported is the AT support?
* How supported is the QMI the protocol?
* What's the similarity with the EC-25? |
| WiFi: RTL8723BS?[2] | | TODO:
* TODO: check if it requires a loadable nonfree firwmare? |
| USB – C (Power, Data and Video Out) | | TODO:
* Which USB version is used ?
* Does it also give access to the serial port |
| 2GB of LPDDR3 RAM
5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass) | TODO:
* Check if it meets Android 9 requirements |
| Bluetooth: 4.0, A2DP | | TODO:
* Which chip is used?
* Does it require a firmware update ? |
| GNSS: GPS, GPS-A, GLONASS | | TODO:
* Which chip is used? |
| Main Camera: Single OV6540, 5MP, 1/4″, LED Flash | TODO:
* Check if it requires a loadable firmware |
| Selfie Camera: Single GC2035, 2MP, f/2.8, 1/5″ | TODO:
* Check if it requires a loadable firmware |
| Bootable Micro SD
16GB eMMC | | TODO:
* What's the boot order ? |
| Sensors: accelerator, gyro, proximity, compass, barometer, ambient light | TODO:
* What chips are used |
h2. References.
fn1. Some of the specifications are available on the "device page":https://www.pine64.org/pinephone/
fn2. See "this mail":https://lists.osuosl.org/pipermail/replicant/2019-July/001997.html for the reference.