TestingInfrastructure » History » Revision 15
Revision 14 (Denis 'GNUtoo' Carikli, 11/27/2018 02:06 AM) → Revision 15/55 (Denis 'GNUtoo' Carikli, 11/27/2018 03:22 PM)
h1. TestingInfrastructure h2. Projects and/or hardware that can be used to do functional testing h3. Lava "Lava":https://www.linaro.org/engineering/projects/lava/ can be used to do functional tests on real hardware. It can be easily installed on PureOS, an FSDG compliant GNU/Linux distribution. h3. OsmoGSMTester The "OsmoGSMTester project":https://osmocom.org/projects/osmo-gsm-tester is able to be interfaced with the Android RIL through ofono and can emulate a GSM network with the help of a compatible GSM base station or SDR. h3. Simtrace2 The "Simtrace 2 project":https://osmocom.org/projects/simtrace2/wiki can be used, along with SIM card readers to programmatically feed a SIM card to a smartphone. This can be used to run test on real networks. h2. Replicant supported devices and testing h3. Requirements * Antenna connector for the modem * The ability to control the device buttons in order to be able to programmatically power on and off the device, and trigger boots into the bootloader and recovery * Optionally a way to connect to the serial port, programmatically h3. Galaxy S2 (I9100) * The Galaxy S2 (I9100) has: ** An antenna connector ** The SOC serial port that is accessible behind the USB connector at a low voltage ** A full size mini-sim (easier to interface with) Holding the smartphone in place: * The smartphone could either be screwed on a metallic surface or an external case could be screwed on a metallic surface enabling the smartphone not to move. SIM cards: * Simtrace 2 "lacks screw holes":https://osmocom.org/issues/3711 so a way must be found to make sure that it doesn't move as it uses flex cables to interface with the SIM socket of the smartphone. That may be fixed in a subsequent hardware revision. Serial port and USB: Buttons: Battery: Antenna connector and GSM tower or SDR: The Galaxy S2 (I9100) has two antenna connectors: * One internal connector, TODO: find the connector type * One external connector, TODO: Find the connector type