Actions
UART » History » Revision 22
« Previous |
Revision 22/93
(diff)
| Next »
Denis 'GNUtoo' Carikli, 12/17/2018 02:05 PM
Serial port¶
There is an in-depth article covering several Samsung devices in the SamsungSerial page
Settings¶
| Device | I/O voltage | ID<->GND | SOC TX | SOC RX | switch | Comments |
|---|---|---|---|---|---|---|
| I9300 | 1.8V1 | 619 kOhms3 | D- | D+ | It gives a shell once Replicant has booted | |
| Nexus S | 619K | 150 kOhm | FSA9480 | |||
| Galaxy Nexus | 619 kOhms4 | |||||
| Optimus Black | N/A2 | DP3T |
Other links¶
*
1 Measured between USB GND and USB VCC
2 Code is required to use the switch as you need to configure both the MUIC and DP3T switch
Updated by Denis 'GNUtoo' Carikli over 6 years ago · 22 revisions