UART » History » Revision 33
Revision 32 (Denis 'GNUtoo' Carikli, 05/20/2019 03:08 PM) → Revision 33/93 (Denis 'GNUtoo' Carikli, 05/20/2019 03:26 PM)
h1. Serial port There is an in-depth article covering several Samsung devices in the [[SamsungSerial]] page h2. Settings |_. Device and documentation |_. I/O voltage |_. ID<->GND |_. SOC TX |_. SOC RX |_. switch |_. stock bootloader settings |_. Comments | | I9300 |/2. 1.8V[1] |/2. 619 kOhms[3] |/2. D- |/2. D+ |/2. MAX77693[5] |* speed: 115200 * pressing the volume-down button during boot increase verbosity |/2. It gives a shell once Replicant 6 has booted | | I9305 | | | [[GalaxyNexusI9250SerialConsole|Galaxy Nexus]] [[NexusSI902xSerial|Nexus S]] | | 619 kOhms[4] 150 kOhm | | | FSA9480 | | | | [[NexusSI902xSerial|Nexus S]] [[GalaxyNexusI9250SerialConsole|Galaxy Nexus]] | | 150 kOhm 619 kOhms[4] | | | FSA9480 | | | | [[OptimusBlackSerial|Optimus Black]] | | N/A[2] | | | DP3T | | | fn1. Measured between USB GND and USB VCC fn2. Code is required to use the switch as you need to configure both the MUIC and DP3T switch fn3. See "The related driver source code":https://git.replicant.us/replicant/kernel_samsung_smdk4412/tree/drivers/misc/max77693-muic.c#n102 fn4. See the "postmarketOS wiki page on Serial debugging":https://wiki.postmarketos.org/wiki/Serial_debugging fn5. See the "driver":https://git.replicant.us/replicant/kernel_samsung_smdk4412/tree/drivers/misc/max77693-muic.c and the "ifixit teardown":https://www.ifixit.com/Teardown/Samsung+Galaxy+S+III+Teardown/9391 h2. Interesting links There is a "page on Serial debugging":https://wiki.postmarketos.org/wiki/Serial_debugging on the postmarketOS wiki that contains information for using the serial port for many smartphones models.