Project

General

Profile

XMMBoot » History » Revision 31

Revision 30 (Denis 'GNUtoo' Carikli, 03/16/2020 06:32 AM) → Revision 31/213 (Denis 'GNUtoo' Carikli, 03/16/2020 06:34 AM)

h1. XMMBoot 

 h2.    Introduction 

 For both libsamsung-ipc and the Linux driver it's interesting to understand better the boot of the modem in order to come with good names for the abstraction. 

 h2. GPIOs 

 The GPIO platform data names were taken from the "modem_modemctl_device_xmm6260.c":https://git.replicant.us/replicant/kernel_samsung_smdk4412/tree/drivers/misc/modem_if/modem_modemctl_device_xmm6260.c file 

 |_. ioctl name |_. function pointer name |_. gpio platform data name |_. present |_. absent |_. comments | 
 | | | gpio_cp_on | | | cp == baseband processor | 
 | | | gpio_reset_req_n | | 
 | | | gpio_cp_reset | | | cp == baseband processor | 
 | | | gpio_pda_active | | 
 | | | gpio_phone_active | | 
 | | | gpio_cp_dump_int | | | cp == baseband processor | 
 | IOCTL_MODEM_BOOT_ON 
 IOCTL_MODEM_BOOT_OFF | modem_boot_on 
 modem_boot_off | gpio_flm_uart_sel | Galaxy Nexus | Not used in libsamsung-ipc for other Replicant compatible devices | Modem download mode ? | 
 | | | gpio_cp_warm_reset | | |    cp == baseband processor    | 
 | | | gpio_revers_bias_clear | | | | 
 | | | gpio_revers_bias_restore | | | | 
 | | | gpio_sim_detect | | | Detect SIM card presence ? | 

 h3. SIM card presence detection 

 Do we really want to check the SIM card presence? 

 Would it be possible not to for privacy reasons? 

 Example: 
 * Boot a modem with a SIM 
 * Take away the SIM card 
 * Go to a protest with only the SIM card and a phone with no data on it to be able to call if necessary. 

 h3. TODO 

 * check gpio_flm_uart_sel in smdk4412 kernel too 

 h2. Modem partitions 

 h3. GT-I9300, GT-N7100 

 |_. Location |_. Name |_. Content | 
 | [ 0x0 -> 0xfff ] | ? | Partition table? | 
 | [ "[ 0x1000 -> 0xefff ] ]":https://git.replicant.us/replicant/external_libsamsung-ipc/tree/samsung-ipc/devices/i9300/i9300.h?id=9ff9785a7f48e32f107ca7fb2e298b1320ad4cbc#n24 | PSIRAM | First stage bootloader? | 
 | [ "[ 0xF000 -> 0x27fff ] ]":https://git.replicant.us/replicant/external_libsamsung-ipc/tree/samsung-ipc/devices/i9300/i9300.h?id=9ff9785a7f48e32f107ca7fb2e298b1320ad4cbc#n26 | EBL | Second stage bootloader ? | 
 | [ 0x28000 -> 0x9ff7ff ] | MAIN | ? | 
 | [ 0x9ff800 -> 0x9fffff ] | SECPACK | ? | 
 | [ 0xa00000 -> 0xbfffff ] | NV | ? | 

 References for the table: 
 * https://git.replicant.us/replicant/external_libsamsung-ipc/tree/samsung-ipc/devices/i9300/i9300.h?id=9ff9785a7f48e32f107ca7fb2e298b1320ad4cbc 
 * https://git.replicant.us/replicant/external_libsamsung-ipc/tree/samsung-ipc/devices/n7100/n7100.h?id=9ff9785a7f48e32f107ca7fb2e298b1320ad4cbc 
 * Verified on GT-I9300 and GT-N7100 modem partition table 

 


 h4. Partition table ? 

 <pre> 
 $ hexdump -C RADIO.img 
 00000000    50 53 49 52 41 4d 00 00    00 00 00 00 00 10 00 00    |PSIRAM..........| 
 00000010    00 00 00 00 00 e0 00 00    00 00 00 00 00 00 00 00    |................| 
 00000020    45 42 4c 00 00 00 00 00    00 00 00 00 00 f0 00 00    |EBL.............| 
 00000030    00 00 00 60 00 90 01 00    00 00 00 00 00 00 00 00    |...`............| 
 00000040    4d 41 49 4e 00 00 00 00    00 00 00 00 00 80 02 00    |MAIN............| 
 00000050    00 00 30 60 00 78 9d 00    00 00 00 00 00 00 00 00    |..0`.x..........| 
 00000060    53 45 43 50 41 43 4b 00    00 00 00 00 00 f8 9f 00    |SECPACK.........| 
 00000070    00 00 00 00 00 08 00 00    00 00 00 00 00 00 00 00    |................| 
 00000080    4e 56 00 00 00 00 00 00    00 00 00 00 00 00 a0 00    |NV..............| 
 00000090    00 00 e8 60 00 00 20 00    00 00 00 00 00 00 00 00    |...`.. .........| 
 000000a0    00 00 00 00 00 00 00 00    00 00 00 00 00 00 00 00    |................| 
 * 
 [...] 
 </pre> 

 h2. Links 

 * "modem_modemctl_device_xmm6260.c":https://git.replicant.us/replicant/kernel_samsung_smdk4412/tree/drivers/misc/modem_if/modem_modemctl_device_xmm6260.c 
 * https://forum.xda-developers.com/galaxy-s2/help/how-to-talk-to-modem-commands-t1471241/page4